multiple addresses and multiple ports in Switch mode

[Rob Townley]

this node doesnt have two nics, the public address is for those
connecting from the public side of the NAT.  As far as that tinc node
knows, it is using 655.  i will look elsewhwere for the connection
problem. dynamic dns of port number could help tinc get better meta
knowledge about itself.

What was the name of the dns library you recommended?  Does it work
with dnsmasq?

Do you use gdb debugger?

On 2/12/10, Guus Sliepen <guus at tinc-vpn.org> wrote:
> On Thu, Feb 11, 2010 at 03:06:17PM -0600, Rob Townley wrote:
>
>>    i have a switched and bridged tincd node with two addresses, each with
>> a
>>    different port.
>>    Address =  37.70.156.168   28655
>>    Address =  192.168.2.228   655
>
> Tinc itself will only listen on one port. By default 655, if you want
> another
> port you can use the Port statement. It will also use this port to send
> packets
> from.
>
> --
> Met vriendelijke groet / with kind regards,
>      Guus Sliepen <guus at tinc-vpn.org>
>