Fix link to the documentation page.

[wiki] / examples / proxy-arp.mdwn

diff --git a/examples/proxy-arp.mdwn b/examples/proxy-arp.mdwn
index 70cb092..834e84c 100644 (file)
--- a/examples/proxy-arp.mdwn
+++ b/examples/proxy-arp.mdwn
@@ -22,46 +22,46 @@ The network setup is as follows:
 
 ### Configuration of tinc at the office
 
 
 ### Configuration of tinc at the office
 

->     host# cat /etc/tinc/vpn/tinc.conf
->     Name = office
->     #Optional:
->     #Mode = switch
->     
->     host# cat /etc/tinc/vpn/tinc-up
->     #!/bin/sh
->     
->     ifconfig $INTERFACE 192.168.1.2 netmask 255.255.255.255
->     route add 192.168.1.123 dev $INTERFACE
->     echo 1 >/proc/sys/net/ipv4/conf/eth0/proxy_arp
->     echo 1 >/proc/sys/net/ipv4/conf/$INTERFACE/proxy_arp
->     
->     host# ls /etc/tinc/vpn/hosts
->     office  roadwarrior  ...
->     
->     host# cat /etc/tinc/vpn/hosts/office
->     Address = 123.234.123.42
->     Subnet = 192.168.1.0/24
->     -----BEGIN RSA PUBLIC KEY-----
->     ...
->     -----END RSA PUBLIC KEY-----
->     
->     host# cat /etc/tinc/vpn/hosts/roadwarrior
->     Subnet = 192.168.1.123
->     -----BEGIN RSA PUBLIC KEY-----
->     ...
->     -----END RSA PUBLIC KEY-----
+       host# cat /etc/tinc/vpn/tinc.conf
+       Name = office
+       #Optional:
+       #Mode = switch
+       
+       host# cat /etc/tinc/vpn/tinc-up
+       #!/bin/sh
+       
+       ifconfig $INTERFACE 192.168.1.2 netmask 255.255.255.255
+       route add 192.168.1.123 dev $INTERFACE
+       echo 1 >/proc/sys/net/ipv4/conf/eth0/proxy_arp
+       echo 1 >/proc/sys/net/ipv4/conf/$INTERFACE/proxy_arp
+       
+       host# ls /etc/tinc/vpn/hosts
+       office  roadwarrior  ...
+       
+       host# cat /etc/tinc/vpn/hosts/office
+       Address = 123.234.123.42
+       Subnet = 192.168.1.0/24
+       -----BEGIN RSA PUBLIC KEY-----
+       ...
+       -----END RSA PUBLIC KEY-----
+       
+       host# cat /etc/tinc/vpn/hosts/roadwarrior
+       Subnet = 192.168.1.123
+       -----BEGIN RSA PUBLIC KEY-----
+       ...
+       -----END RSA PUBLIC KEY-----

 
 ### Configuration of tinc at the road warrior
 
 
 ### Configuration of tinc at the road warrior
 

->     host# cat /etc/tinc/vpn/tinc.conf
->     Name = roadwarrior
->     #Optional:
->     #Mode = switch
->     
->     host# cat /etc/tinc/vpn/tinc-up
->     #!/bin/sh
->     
->     ifconfig $INTERFACE 192.168.1.123 netmask 255.255.255.0
+       host# cat /etc/tinc/vpn/tinc.conf
+       Name = roadwarrior
+       #Optional:
+       #Mode = switch
+       
+       host# cat /etc/tinc/vpn/tinc-up
+       #!/bin/sh
+       
+       ifconfig $INTERFACE 192.168.1.123 netmask 255.255.255.0

 
 The host config files are, of course, identical to those on the office node.
 
 
 The host config files are, of course, identical to those on the office node.
 


@@ -72,7 +72,7 @@ to the roadwarrior's address hardcoded.  To have tinc automatically add the
 necessary routes, remove the `route add` command from the `tinc-up` script, and
 instead add this `subnet-up` script:
 
 necessary routes, remove the `route add` command from the `tinc-up` script, and
 instead add this `subnet-up` script:
 

->     host# cat /etc/tinc/vpn/subnet-up
->     #!/bin/sh
->     [ "$NAME" = "$NODE" ] && exit 0
->     ip route replace $SUBNET dev $INTERFACE
+       host# cat /etc/tinc/vpn/subnet-up
+       #!/bin/sh
+       [ "$NAME" = "$NODE" ] && exit 0
+       ip route replace $SUBNET dev $INTERFACE