Windows subnets

[Andrew Savinykh]

  Thank you for your reply. As far as I can see there is no point 
specifying subnet that consists of more than one PC in tinc config if 
you are going to install tinc on every PC in the subnet anyway. Correct 
me if I'm wrong.
Now, assuming I'm right, there will be PCs in the subnet that don't have 
tinc installed on them. How to configure these PCs so they are a part of 
the subnet and participate in routing?

Cheers,
Andrew

On 6/10/2010 10:13 p.m., Cédric Lemarchand wrote:
> Hi,
>
> I am not sure to understand what you mean with "joining" a subnet.
>
> But if your "local computer" need to reach the "remote subnet" served 
> by tinc, you can set the local IP of the local tinc server as the 
> default gateway, or add a route to the remote subnet via the local 
> tinc IP. Of course, computer located on the remote subnet need the 
> same thing.
>
> Cédric
>
> Le 06/10/10 09:37, Andrew Savinykh a écrit :
>>  Hello all,
>>
>> I understand that each tinc daemon corresponds to one or more subnets 
>> that it "owns" a subnet can be a single ip or more.
>> Could you please tell me what do I need to do to join a computer in 
>> local network (windows) to a subnet served by tinc?
>>
>> Thank you in advance,
>> Andrew
>>
>> _______________________________________________
>> tinc mailing list
>> tinc at tinc-vpn.org
>> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
>
>
> -- 
>
> *Cédric Lemarchand – iXSea SAS*
>
> Administrateur Système & Réseaux
>
> http://www.ixsea.com/ - <cedric.lemarchand at ixsea.com> 
> <mailto:cedric.lemarchand at ixsea.com>
>
> Tel: +33 1 30 08 8888 – GSM: +33 6 37 23 40 93
>
>
> _______________________________________________
> tinc mailing list
> tinc at tinc-vpn.org
> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tinc-vpn.org/pipermail/tinc/attachments/20101006/3648345f/attachment.htm>