Load-Distribution in Routed mode?

[Guus Sliepen]

On Sun, Apr 06, 2014 at 11:12:11PM +0800, shikkc wrote:

> >You can change the order of preference by assigning weights to the Subnets,
> >see the description of the Subnet statement in the manual:
> 
> I've tried this in the past without any success; following the example, if I
> give elephant:
> 
> Subnet=10.1.1.0/24#10
> 
> And give donkey:
> 
> Subnet=10.1.1.0/24#50
> 
> Traffic will still be routed via donkey instead of elephant. This is still
> the behavior on 1.1pre10 using protocol 17 (not 17.3). I have not tried
> ExperimentalProtocol with Mode=router.

Did you change the Subnet statement in hosts/donkey on the donkey node itself?
If not, do so. You also need to restart the tincd on donkey after you have done
it.

If it still doesn't work as intended, could you send me a copy of tinc.conf
from elephant and donkey, and the host config file?

-- 
Met vriendelijke groet / with kind regards,
     Guus Sliepen <guus at tinc-vpn.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://www.tinc-vpn.org/pipermail/tinc/attachments/20140406/15e4ed76/attachment.sig>