No subject

[Chris MacLean]

Hi,

I am using tin-0.3 and trying to route over a tinc tunnel.  Here is my
details:

   192.168.10.0/24
         / \
          |
          | ethernet network
          |
         \ /
-------------------------
| 192.168.10.254 (eth0) |
| Linux Router          |
| 192.168.0.1 (tap0)    |
-------------------------
         / \
          |
          |
          | tinc tunnel
          |
          |
         \ /
-------------------------
| 192.168.0.2 (tap0)    |
| Linux Router          |
| 192.168.20.50 (eth0)  |
-------------------------
         / \
          |
          | ethernet network
          | 
         \ /
   192.168.20.0/24


The tinc tunnel is up and 192.168.0.1 & 2 are talking ok, but when I try to
send a packet from 192.168.10.0/24 to 192.168.20.0/24 I get a message
similar to:

Sep 11 17:07:40 pegasus tincd.exosea02[17935]: An IP packet (0800) for
192.168.20.53 from 192.168.10.14
Sep 11 17:07:40 pegasus tincd.exosea02[17935]: trying to look up
192.168.20.53 in connection list failed.

So I looked it up, and I see it is trying to match 192.168.20.53 in its
connection list, which it is not there.

The routing is setup ok, it just seems tincd won't let my packets thru.
Can anyone shed some light on this?

Thankx

Chris


-- 
// Chris MacLean  Senior Systems Engineer  Global Media Corp. * //
// cmaclean at globalmedia.com  ICQ#25731309  http://globalmedia.com/
-
Tinc:         Discussion list about the tinc VPN daemon
Archive:      http://mail.nl.linux.org/lists/
Tinc site:    http://ftp.nl.linux.org/pub/linux/tinc/