Don't bother to chown, and correctly document ConnectTo.

diff --git a/doc/tinc.texi b/doc/tinc.texi
index 0ce939a..44bec21 100644 (file)
--- a/doc/tinc.texi
+++ b/doc/tinc.texi
@@ -1,5 +1,5 @@
 \input texinfo   @c -*-texinfo-*-
 \input texinfo   @c -*-texinfo-*-

-@c $Id: tinc.texi,v 1.8.4.30 2002/06/21 10:11:10 guus Exp $
+@c $Id: tinc.texi,v 1.8.4.31 2002/07/16 13:18:27 guus Exp $

 @c %**start of header
 @setfilename tinc.info
 @settitle tinc Manual
 @c %**start of header
 @setfilename tinc.info
 @settitle tinc Manual


@@ -18,7 +18,7 @@ Copyright @copyright{} 1998-2002 Ivo Timmermans
 <ivo@@o2w.nl>, Guus Sliepen <guus@@sliepen.eu.org> and
 Wessel Dankers <wsl@@nl.linux.org>.
 
 <ivo@@o2w.nl>, Guus Sliepen <guus@@sliepen.eu.org> and
 Wessel Dankers <wsl@@nl.linux.org>.
 

-$Id: tinc.texi,v 1.8.4.30 2002/06/21 10:11:10 guus Exp $
+$Id: tinc.texi,v 1.8.4.31 2002/07/16 13:18:27 guus Exp $

 
 Permission is granted to make and distribute verbatim copies of this
 manual provided the copyright notice and this permission notice are
 
 Permission is granted to make and distribute verbatim copies of this
 manual provided the copyright notice and this permission notice are


@@ -43,7 +43,7 @@ Copyright @copyright{} 1998-2002 Ivo Timmermans
 <ivo@@o2w.nl>, Guus Sliepen <guus@@sliepen.eu.org> and
 Wessel Dankers <wsl@@nl.linux.org>.
 
 <ivo@@o2w.nl>, Guus Sliepen <guus@@sliepen.eu.org> and
 Wessel Dankers <wsl@@nl.linux.org>.
 

-$Id: tinc.texi,v 1.8.4.30 2002/06/21 10:11:10 guus Exp $
+$Id: tinc.texi,v 1.8.4.31 2002/07/16 13:18:27 guus Exp $

 
 Permission is granted to make and distribute verbatim copies of this
 manual provided the copyright notice and this permission notice are
 
 Permission is granted to make and distribute verbatim copies of this
 manual provided the copyright notice and this permission notice are


@@ -635,12 +635,9 @@ ethertap devices:
 
 @example
 mknod -m 600 /dev/tap0 c 36 16
 
 @example
 mknod -m 600 /dev/tap0 c 36 16

-chown 0.0 /dev/tap0

 mknod -m 600 /dev/tap1 c 36 17
 mknod -m 600 /dev/tap1 c 36 17

-chown 0.0 /dev/tap0

 ...
 mknod -m 600 /dev/tap@emph{N} c 36 @emph{N+16}
 ...
 mknod -m 600 /dev/tap@emph{N} c 36 @emph{N+16}

-chown 0.0 /dev/tap@emph{N}

 @end example
 
 There is a maximum of 16 ethertap devices.
 @end example
 
 There is a maximum of 16 ethertap devices.


@@ -650,7 +647,6 @@ following device file (unless it already exist):
 
 @example
 mknod -m 600 /dev/tun c 10 200
 
 @example
 mknod -m 600 /dev/tun c 10 200

-chown 0.0 /dev/tun

 @end example
 
 If you use Linux, and you run the new 2.4 kernel using the devfs filesystem,
 @end example
 
 If you use Linux, and you run the new 2.4 kernel using the devfs filesystem,


@@ -851,15 +847,15 @@ This option may not work on all platforms.
 
 @cindex ConnectTo
 @item @strong{ConnectTo = <name>}
 
 @cindex ConnectTo
 @item @strong{ConnectTo = <name>}

-Specifies which host to connect to on startup.  Multiple ConnectTo
-variables may be specified, if connecting to the first one fails then
-tinc will try the next one, and so on.  It is possible to specify
-hostnames for dynamic IP addresses (like those given on dyndns.org),
-tinc will not cache the resolved IP address.
-
-If you don't specify a host with ConnectTo, regardless of whether a
-value for ConnectPort is given, tinc won't connect at all, and will
-instead just listen for incoming connections.
+Specifies which other tinc daemon to connect to on startup.
+Multiple ConnectTo variables may be specified,
+in which case outgoing connections to each specified tinc daemon are made.
+The names should be known to this tinc daemon
+(i.e., there should be a host configuration file for the name on the ConnectTo line).
+
+If you don't specify a host with ConnectTo,
+tinc won't try to connect to other daemons at all,
+and will instead just listen for incoming connections.

 
 @cindex Device
 @item @strong{Device = <device>} (/dev/tap0 or /dev/misc/net/tun)
 
 @cindex Device
 @item @strong{Device = <device>} (/dev/tap0 or /dev/misc/net/tun)