Update of RedHat build scripts.

diff --git a/Makefile.am b/Makefile.am
index c8cc84c..85c2c18 100644 (file)
--- a/Makefile.am
+++ b/Makefile.am
@@ -17,7 +17,7 @@ ChangeLog:
        cvs2cl -U cvsusers --fsf
 
 cvs-clean: maintainer-clean
        cvs2cl -U cvsusers --fsf
 
 cvs-clean: maintainer-clean

-       for f in $(CVS_CREATED) `find -name Makefile.in` ; do\
+       for f in $(CVS_CREATED) `find -name Makefile.in` tinc-$(VERSION).tar.gz; do\

          rm -Rf "$$f"; \
        done
 
          rm -Rf "$$f"; \
        done
 


@@ -27,8 +27,7 @@ deb:
 rpm: dist
        cp $(distdir).tar.gz /usr/src/redhat/SOURCES/
        cp redhat/tinc.spec /usr/src/redhat/SOURCES/
 rpm: dist
        cp $(distdir).tar.gz /usr/src/redhat/SOURCES/
        cp redhat/tinc.spec /usr/src/redhat/SOURCES/

-       cd /usr/src/redhat/SOURCES/
-       rpm -bi tinc.spec
+       cd /usr/src/redhat/SOURCES/ && rpm -bb tinc.spec

 
 release:
        rm -f ChangeLog
 
 release:
        rm -f ChangeLog

diff --git a/redhat/tinc b/redhat/tinc
index d3a34dd..9fce417 100644 (file)
--- a/redhat/tinc
+++ b/redhat/tinc
@@ -39,18 +39,6 @@ if [ ! -x $TINCD ]; then
     exit
 fi
 
     exit
 fi
 

-# Check if ip-route is installed
-if [ ! -f /sbin/ip ]; then
-    echo "**tinc: ip-route utilities not installed!" >&2
-    exit
-fi
-
-# Check the kernel
-if ! ip addr &> /dev/null; then
-    echo "**tinc: kernel not configured for use with ip-route!" >&2
-    exit
-fi
-

 # Check the configuration directory
 if [ ! -d $TCONF ]; then
     echo "**tinc: configuration directory ($TCONF) not found!" >&2
 # Check the configuration directory
 if [ ! -d $TCONF ]; then
     echo "**tinc: configuration directory ($TCONF) not found!" >&2


@@ -67,166 +55,15 @@ fi
 NETS="$(sed -e 's/#.*//; s/[[:space:]]//g; /^$/ d' $NETSFILE)"
 
 
 NETS="$(sed -e 's/#.*//; s/[[:space:]]//g; /^$/ d' $NETSFILE)"
 
 

-##############################################################################
-# prefix_to_mask       Converts prefix length to netmask
-#                      eg. 17 -> 255.255.128.0
-# $1 ... prefix
-
-prefix_to_mask () {
-    _MSK=""; _len="$1"
-    for _dot in "." "." "." " "; do
-       if [ ${_len} -ge 8 ]; then 
-           _fld=8
-       else           
-           _fld="${_len}"
-       fi
-       
-       _MSK="${_MSK}$((255 & (255 << (8 - _fld))))${_dot}"
-       _len=$((_len - _fld))
-    done
-    
-    echo ${_MSK}
-}
-
-
-##############################################################################
-# mask_to_prefix       Converts netmask to prefix length
-#                      eg. 255.255.192.0 -> 18         
-# $1 ... netmask
-
-mask_to_prefix () {
-    _LEN=0; _msk="$1"
-    for _tmp in 1 2 3 4; do
-        _fld=${_msk%%.*}
-       _msk=${_msk#*.}
-       
-       while [ ${_fld} -ne 0 ]; do
-           _fld=$(((_fld << 1) & 255))
-           _LEN=$((_LEN + 1))
-       done
-    done
-    
-    echo ${_LEN}
-}
-
-
-##############################################################################
-# vpn_load ()          Loads VPN configuration
-# 
-# $1 ... VPN to load
-
-vpn_load () {
-    CFG="$TCONF/$1/tinc.conf"
-    [ -f $CFG ] || { MSG="$CFG does not exist!"; return 1; }
-    
-    # load TINCD config
-    DEV="$(grep -i -e '^[[:space:]]*TapDevice' $CFG | sed 's/[[:space:]]//g; s/^.*=//g')"
-    VPN="$(grep -i -e '^[[:space:]]*(MyOwnVPNIP|MyVirtualIP)' -E $CFG | sed 's/[[:space:]]//g; s/^.*=//g')"
-    IFM="$(grep -i -e '^[[:space:]]*VPNMask' $CFG | sed 's/[[:space:]]//g; s/^.*=//g')"
-    
-    # TapDevice syntax validation
-    [ -z "$DEV" ] && \
-       { MSG="TapDevice required!"; return 1; }
-    [ $(echo $DEV | wc -l) -gt 1 ] && \
-       { MSG="multiple TapDevice entries not allowed!"; return 1; }
-    echo $DEV | grep -q -x -E '/dev/tap[[:digit:]]+' ||
-       { MSG="TapDevice should be in form /dev/tapX!"; return 1; }
-
-    # MyOwnVPNIP/MyVirtualIP syntax validation 
-    [ -z "$VPN" ] && \
-       { MSG="MyOwnVPNIP/MyVirtualIP required!"; return 1; }
-    [ $(echo $VPN | wc -l) -gt 1 ] && \
-       { MSG="multiple MyOwnVPNIP/MyVirtualIP entries not allowed!"; return 1; }
-    echo $VPN | grep -q -x -E \
-       '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}/[[:digit:]]{1,2}' || \
-       { MSG="badly formed MyOwnVPNIP/MyVirtualIP address $VPN!"; return 1; }
-
-    # VPNMask syntax validation        
-    [ $(echo $IFM | wc -l) -gt 1 ] && \
-       { MSG="multiple VPNMask entries not allowed!"; return 1; }
-       
-                                                                                           
-    # device & IP address extraction
-    TAP=${DEV##*/}
-    NUM=${TAP#tap}
-    ADR=${VPN%%/*}
-                                                                                                           
-    # netmask is calculated from MyVirtualIP netmask prefix length, except when
-    # VPNMask is specified, in which case it is used instead of default prefix
-
-    # VPNMask not specified
-    if [ -z "$IFM" ]; then
-       LEN=${VPN##*/}
-       MSK=$(prefix_to_mask $LEN)
-       
-    # VPNMask is prefix length, convert it to netmask for MSK
-    elif echo $IFM | grep -q -x -E '[[:digit:]]{1,2}'; then
-       VPN="$ADR/$IFM"
-       MSK=$(prefix_to_mask $IFM)
-       
-    # VPNMask is netmask, convert it to prefix length for VPN
-    elif echo $IFM | grep -q -x -E '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}'; then
-       VPN="$ADR/$(mask_to_prefix $IFM)"
-       MSK="$IFM"
-       
-    else
-       MSG="badly formed interface netmask (VPNMask=$IFM)!"
-       return 1
-    fi 
-    
-
-    # Network & broadcast addresses
-    BRD=$(ipcalc --broadcast $ADR $MSK | cut -d"=" -f2)
-    NET=$(ipcalc --network $ADR $MSK | cut -d"=" -f2)
-
-    # MAC address
-    MAC=$(printf "fe:fd:%0.2x:%0.2x:%0.2x:%0.2x" $(echo $ADR | { IFS=. ; read a b c d; echo $a $b $c $d; }))
-    
-    # debugging 
-    # echo >&2
-    # echo "VPN $VPN TAP $TAP NUM $NUM MAC $MAC IFM $IFM" >&2
-    # echo "ADR $ADR MSK $MSK NET $NET BRD $BRD" >&2
-    
-    return 0
-}
-
-

 ##############################################################################
 # vpn_start ()         starts specified VPN
 # 
 # $1 ... VPN to start
 
 vpn_start () {    
 ##############################################################################
 # vpn_start ()         starts specified VPN
 # 
 # $1 ... VPN to start
 
 vpn_start () {    

-    MSG=""; ERR=""
-    vpn_load $1 || return 1
-            
-    # create device file
-    if [ ! -c $DEV ]; then
-       [ -e $DEV ] && rm -f $DEV
-       mknod --mode=0600 $DEV c 36 $((16 + NUM))
-    fi
-    
-    # load device module
-    ERR="$(insmod ethertap -o "ethertap$NUM" unit="$NUM" 2>&1 1> /dev/null)" ||
-        { MSG="could not insmod ethertap as unit $NUM!"; return 2; }
-    
-    # configure the interface
-    ERR="$(ip link set $TAP address $MAC 2>&1)" ||
-       { MSG="could not set address for device $TAP!"; return 3; }
-       
-    ERR="$(ip link set $TAP up 2>&1)" ||
-       { MSG="could not bring up device $TAP!"; return 3; }
-       
-    ERR="$(ip addr add $VPN brd $BRD dev $TAP 2>&1)" ||
-       { MSG="could not set IP address for device $TAP!"; return 3; }
-    

     # start tincd
     $TINCD --net="$1" $DEBUG || \
        { MSG="could not start daemon for network $1"; return 3; }
     # start tincd
     $TINCD --net="$1" $DEBUG || \
        { MSG="could not start daemon for network $1"; return 3; }

-
-    # setup custom static routes
-    /etc/sysconfig/network-scripts/ifup-routes $TAP
-

     return 0
 } # vpn_start
 
     return 0
 } # vpn_start
 


@@ -237,9 +74,6 @@ vpn_start () {
 # $1 ... VPN to stop
 
 vpn_stop () {
 # $1 ... VPN to stop
 
 vpn_stop () {

-    MSG=""; ERR=""
-    vpn_load $1 || return 1
-    

     # kill the tincd daemon
     PID="$TPIDS/tinc.$1.pid"
     if [ -f $PID ]; then
     # kill the tincd daemon
     PID="$TPIDS/tinc.$1.pid"
     if [ -f $PID ]; then


@@ -257,14 +91,6 @@ vpn_stop () {
        # remove stale PID file
        [ -f $PID ] && rm -f $PID
     fi
        # remove stale PID file
        [ -f $PID ] && rm -f $PID
     fi

-    
-    # bring the interface down
-    ip addr flush dev $TAP &> /dev/null
-    ip link set $TAP down &> /dev/null
-    
-    # remove ethertap module
-    rmmod "ethertap$NUM" &> /dev/null
-    

     return 0
 } # vpn_stop
 
     return 0
 } # vpn_stop
 

diff --git a/redhat/tinc.spec b/redhat/tinc.spec
index e5dfb76..b7357d9 100644 (file)
--- a/redhat/tinc.spec
+++ b/redhat/tinc.spec
@@ -1,13 +1,14 @@
 Summary: tinc Virtual Private Network daemon
 Name: tinc
 Summary: tinc Virtual Private Network daemon
 Name: tinc

-Version: 1.0pre3
-Release: 1
+Version: 1.0
+Release: cvs

 Copyright: GPL
 Group: System Environment/Daemons
 URL: http://tinc.nl.linux.org/
 Copyright: GPL
 Group: System Environment/Daemons
 URL: http://tinc.nl.linux.org/

-Source0: %{name}-%{version}.tar.gz
-Buildroot: /var/tmp/%{name}-%{version}-%{release}
-Requires: iproute
+Source0: %{name}-%{version}-%{release}.tar.gz
+Buildroot: /var/tmp/%{name}
+#-%{version}-%{release}
+#Requires: iproute

 # for building the package the following is required:
 # /usr/bin/texi2html /usr/bin/patch
 
 # for building the package the following is required:
 # /usr/bin/texi2html /usr/bin/patch
 


@@ -27,10 +28,10 @@ See http://tinc.nl.linux.org/
 
 %prep
 
 
 %prep
 

-%setup -q -n %{name}-%{version}
+%setup -q -n %{name}-%{version}-%{release}

 
 %build
 
 %build

-./configure --prefix=/usr --sysconfdir=/etc
+./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var

 make
 /usr/bin/texi2html doc/tinc.texi
 
 make
 /usr/bin/texi2html doc/tinc.texi
 


@@ -42,29 +43,8 @@ gzip $RPM_BUILD_ROOT/usr/info/tinc.info
 mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d/
 cp redhat/tinc $RPM_BUILD_ROOT/etc/rc.d/init.d/
 
 mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d/
 cp redhat/tinc $RPM_BUILD_ROOT/etc/rc.d/init.d/
 

-ME=my.vpn.ip.number
-PEER=peer.vpn.ip.number
-PEEREAL=peer.real.ip.number
-
-umask 077
-mkdir -p $RPM_BUILD_ROOT/etc/tinc/$PEER/passphrases
-cat <<END >$RPM_BUILD_ROOT/etc/tinc/$PEER/tinc.conf
-# Sample tinc configuration. 
-# Insert your own ip numbers instead of the placeholders,
-# and be sure to use your own passphrases.
-# See man tinc.conf(5) tincd(8) genauth(8), info tinc and 
-# /usr/doc/%{name}-%{version}/tinc.conf.sample
-TapDevice = /dev/tap0
-ConnectTo = $PEEREAL
-MyVirtualIP = $ME/32
-AllowConnect = no
-END
-cat <<END >$RPM_BUILD_ROOT/etc/tinc/$PEER/passphrases/local
-1024 c1da5b633b428d783fec96ac89bb6bd4ed97ac673942706ba2240cde977158b7cd5f4055b7db70a7365d1f8df6a1a7c9dbb73f4e2bf8484fc14aee68d0f950e2bce82dd2a6386f040546a61e77cd1c25265ce03182e4e2c9a00ae0ea2f1f89ac04a10f7b67312187b5d2d74618803974ba6f053116b1460bc194c652dc28c84a
-END
-cat <<END >$RPM_BUILD_ROOT/etc/tinc/$PEER/passphrases/$PEER
-1024 9dff58799827c3ae73699d9d4029cf80ee4cfd3a8408495cdb68c78dec602c46f362aedeea80928384254bc7d0bfbf9756c0783b5ec9943161863530a8861947147d124286e8c46fd98af988c96ba65c63acefc01f6c03b6b8f7d9897acb02c083adb7416ee5ccbc19610a8b9ade2599d8f66e94c715f2e1a15054a78a3f3260
-END
+mkdir -p $RPM_BUILD_ROOT/etc/tinc/
+touch $RPM_BUILD_ROOT/etc/tinc/nets.boot

 
 %clean
 rm -rf $RPM_BUILD_ROOT
 
 %clean
 rm -rf $RPM_BUILD_ROOT


@@ -92,6 +72,7 @@ grep -q '^alias tap0' /etc/conf.modules || cat >> /etc/conf.modules << END
 # tinc uses ethertap/netlink
 alias tap0 ethertap
 alias char-major-36 netlink_dev
 # tinc uses ethertap/netlink
 alias tap0 ethertap
 alias char-major-36 netlink_dev

+alias char-major-10-200 tun

 END
 /sbin/install-info /usr/info/tinc.info.gz /usr/info/dir 
 
 END
 /sbin/install-info /usr/info/tinc.info.gz /usr/info/dir 
 


@@ -101,13 +82,10 @@ END
 %postun
 
 %files
 %postun
 
 %files

-%doc AUTHORS ChangeLog NEWS README THANKS *.html doc/tinc.conf.sample
+%doc AUTHORS ChangeLog NEWS README THANKS *.html

 %config /etc/tinc/
 %attr(0755,root,root) /etc/rc.d/init.d/tinc
 %config /etc/tinc/
 %attr(0755,root,root) /etc/rc.d/init.d/tinc

-/usr/sbin/genauth

 /usr/sbin/tincd
 /usr/sbin/tincd

-/usr/lib/tinc/

 /usr/man/man5/tinc.conf.5
 /usr/man/man5/tinc.conf.5

-/usr/man/man8/genauth.8

 /usr/man/man8/tincd.8
 /usr/info/tinc.info.gz
 /usr/man/man8/tincd.8
 /usr/info/tinc.info.gz