X-Git-Url: https://www.tinc-vpn.org/git/browse?p=tinc;a=blobdiff_plain;f=doc%2Ftinc.conf.5.in;h=750e0cf2b77fd7cc7603d5fa792b0095c26568c3;hp=87106a0c7c87091184e580ea92a64c274a9004a7;hb=2077451e07f93edc520cf5bc31815624a2b03fdd;hpb=42e01abd54bd36ee84a45a2b646cfa27034de8d1

diff --git a/doc/tinc.conf.5.in b/doc/tinc.conf.5.in
index 87106a0c..750e0cf2 100644
--- a/doc/tinc.conf.5.in
+++ b/doc/tinc.conf.5.in
@@ -1,8 +1,8 @@
 .Dd 2002-04-09
 .Dt TINC.CONF 5
 .\" Manual page created by:
-.\" Ivo Timmermans <ivo@o2w.nl>
-.\" Guus Sliepen <guus@sliepen.eu.org>
+.\" Ivo Timmermans
+.\" Guus Sliepen <guus@tinc-vpn.org>
 .Sh NAME
 .Nm tinc.conf
 .Nd tinc daemon configuration
@@ -199,11 +199,13 @@ while no routing table is managed.
 .It Va Name Li = Ar name Bq required
 This is the name which identifies this tinc daemon.
 It must be unique for the virtual private network this daemon will connect to.
-.It Va PingTimeout Li = Ar seconds Pq 60
+.It Va PingInterval Li = Ar seconds Pq 60
 The number of seconds of inactivity that
 .Nm tinc
 will wait before sending a probe to the other end.
-If that other end doesn't answer within that same amount of time,
+.It Va PingTimeout Li = Ar seconds Pq 5
+The number of seconds to wait for a response to pings or to allow meta
+connections to block. If the other end doesn't respond within this time,
 the connection is terminated,
 and the others will be notified of this.
 .It Va PriorityInheritance Li = yes | no Po no Pc Bq experimental
@@ -344,6 +346,15 @@ becomes reachable.
 This script is started when the tinc daemon with name
 .Ar HOST
 becomes unreachable.
+.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /host-up
+This script is started when any host becomes reachable.
+.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /host-down
+This script is started when any host becomes unreachable.
+.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /subnet-up
+This script is started when a Subnet becomes reachable.
+The Subnet and the node it belongs to are passed in environment variables.
+.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /subnet-down
+This script is started when a Subnet becomes unreachable.
 .El
 .Pp
 The scripts are started without command line arguments, but can make use of certain environment variables.
@@ -368,10 +379,13 @@ This should be used for commands like
 .Pa ifconfig .
 .It Ev NODE
 When a host becomes (un)reachable, this is set to its name.
+If a subnet becomes (un)reachable, this is set to the owner of that subnet.
 .It Ev REMOTEADDRESS
 When a host becomes (un)reachable, this is set to its real address.
 .It Ev REMOTEPORT
 When a host becomes (un)reachable, this is set to the port number it uses for communication with other tinc daemons.
+.It Ev SUBNET
+When a subnet becomes (un)reachable, this is set to the subnet.
 .El
 .Sh FILES
 The most important files are:
@@ -394,7 +408,7 @@ its connection to the virtual network device.
 .El
 .Sh SEE ALSO
 .Xr tincd 8 ,
-.Pa http://tinc.nl.linux.org/ ,
+.Pa http://www.tinc-vpn.org/ ,
 .Pa http://www.linuxdoc.org/LDP/nag2/ .
 .Pp
 The full documentation for