\input texinfo @c -*-texinfo-*-
+@c $Id: tinc.texi,v 1.8.4.9 2000/11/30 23:39:55 zarq Exp $
@c %**start of header
@setfilename tinc.info
@settitle tinc Manual
@c %**end of header
@ifinfo
+@direntry
+* tinc: (tinc). The tinc Manual.
+@end direntry
This is the info manual for tinc, a Virtual Private Network daemon.
-Copyright 1998 Ivo Timmermans <itimmermans@@bigfoot.com>
+Copyright @copyright{} 1998,199,2000 Ivo Timmermans
+<itimmermans@@bigfoot.com>, Guus Sliepen <guus@@sliepen.warande.net> and
+Wessel Dankers <wsl@@nl.linux.org>.
- Permission is granted to make and distribute verbatim
- copies of this manual provided the copyright notice and
- this permission notice are preserved on all copies.
+$Id: tinc.texi,v 1.8.4.9 2000/11/30 23:39:55 zarq Exp $
- Permission is granted to copy and distribute modified
- versions of this manual under the conditions for
- verbatim copying, provided
- that the entire resulting derived work is distributed
- under the terms of a permission notice identical to this
- one.
+Permission is granted to make and distribute verbatim copies of this
+manual provided the copyright notice and this permission notice are
+preserved on all copies.
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
@end ifinfo
@titlepage
@title tinc Manual
@subtitle Setting up a Virtual Private Network with tinc
-@author Ivo Timmermans <itimmermans@@bigfoot.com>
+@author Ivo Timmermans and Guus Sliepen
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1998 Ivo Timmermans <itimmermans@@bigfoot.com>
+@cindex copyright
+Copyright @copyright{} 1998,1999,2000 Ivo Timmermans
+<itimmermans@@bigfoot.com>, Guus Sliepen <guus@@sliepen.warande.net> and
+Wessel Dankers <wsl@@nl.linux.org>.
+
+$Id: tinc.texi,v 1.8.4.9 2000/11/30 23:39:55 zarq Exp $
- Permission is granted to make and distribute verbatim
- copies of this manual provided the copyright notice and
- this permission notice are preserved on all copies.
+Permission is granted to make and distribute verbatim copies of this
+manual provided the copyright notice and this permission notice are
+preserved on all copies.
- Permission is granted to copy and distribute modified
- versions of this manual under the conditions for
- verbatim copying, provided
- that the entire resulting derived work is distributed
- under the terms of a permission notice identical to this
- one.
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
@end titlepage
@menu
* Introduction:: Introduction
-* Configuring a Linux system:: Before compiling tinc
-* Installing tinc::
+* Installing tinc - preparations::
+* Installing tinc - installation::
* Configuring tinc::
* Running tinc::
* Technical information::
* Concept Index:: All used terms explained
@end menu
+
+@contents
+
@c ==================================================================
-@node Introduction, Configuring a Linux system, Top, Top
+@node Introduction, Installing tinc - preparations, Top, Top
@chapter Introduction
-@c straight from the www page
-
+@cindex tinc
tinc is a Virtual Private Network (VPN) daemon that uses tunneling and
encryption to create a secure private network between hosts on the
Internet.
This tunneling allows VPN sites to share information with each other
over the Internet without exposing any information to others.
-This document is the manual for tinc. Included are chapters on how to
+This document is the manual for tinc. Included are chapters on how to
configure your computer to use tinc, as well as the configuration
process of tinc itself.
@menu
* VPNs:: Virtual Private Networks in general
* tinc:: about tinc
+* Supported platforms::
@end menu
@c ==================================================================
@node VPNs, tinc, Introduction, Introduction
@section Virtual Private Networks
+@cindex VPN
A Virtual Private Network or VPN is a network that can only be accessed
-by a few elected computers that participate. This goal is achievable in
+by a few elected computers that participate. This goal is achievable in
more than just one way.
@cindex private
-For instance, a VPN can consist of a single stand-alone ethernet LAN. Or
-even two computers hooked up using a null-modem cable@footnote{Though
-discussable, I think it qualifies as a VPN.}. In these cases, it is
-obvious that the network is @emph{private}. But there is another type
-of VPN, the type tinc was made for.
+Private networks can consist of a single stand-alone ethernet LAN. Or
+even two computers hooked up using a null-modem cable. In these cases,
+it is
+obvious that the network is @emph{private}, no one can access it from the
+outside. But if your computers are linked to the internet, the network
+is not private anymore, unless one uses firewalls to block all private
+traffic. But then, there is no way to send private data to trusted
+computers on the other end of the internet.
+
+@cindex virtual
+This problem can be solved by using @emph{virtual} networks. Virtual
+networks can live on top of other networks, but do not interfere with
+each other. Mostly, virtual networks appear like a singe LAN, even though
+they can span the entire world. But virtual networks can't be secured
+by using firewalls, because the traffic that flows through it has to go
+through the internet, where other people can look at it.
+
+When one introduces encryption, we can form a true VPN. Other people may
+see encrypted traffic, but if they don't know how to decipher it (they
+need to know the key for that), they cannot read the information that flows
+through the VPN. This is what tinc was made for.
@cindex virtual
tinc uses normal IP datagrams to encapsulate data that goes over the VPN
-network link. In this case it's also clear that the network is
+network link. In this case it's also clear that the network is
@emph{virtual}, because no direct network link has to exist between to
participants.
-As is the case with either type of VPN, anybody could eavesdrop. Or
-worse, alter data. Hence it's probably advisable to encrypt the data
+As is the case with either type of VPN, anybody could eavesdrop. Or
+worse, alter data. Hence it's probably advisable to encrypt the data
that flows over the network.
@c ==================================================================
-@node tinc, , VPNs, Introduction
+@node tinc, Supported platforms, VPNs, Introduction
@section tinc
+@cindex vpnd
+@cindex ethertap
I really don't quite remember what got us started, but it must have been
-Guus' idea. He wrote a simple implementation (about 50 lines of C) that
+Guus' idea. He wrote a simple implementation (about 50 lines of C) that
used the @emph{ethertap} device that Linux knows of since somewhere
-about kernel 2.1.60. It didn't work immediately and he improved it a
-bit. At this stage, the project was still simply called @samp{vpnd}.
+about kernel 2.1.60. It didn't work immediately and he improved it a
+bit. At this stage, the project was still simply called @samp{vpnd}.
Since then, a lot has changed---to say the least.
runtime-configurable---in short, it has become a full-fledged
professional package.
-A lot can---and will be---changed. I have a few things that I'd like to
-see in the future releases of tinc. Not everything will be available in
-the near future. Our first objective is to make tinc work perfectly as
+A lot can---and will be---changed. I have a few things that I'd like to
+see in the future releases of tinc. Not everything will be available in
+the near future. Our first objective is to make tinc work perfectly as
it stands, and then add more advanced features.
-Meanwhile, we're always open-minded towards new ideas. And we're
+Meanwhile, we're always open-minded towards new ideas. And we're
available too.
@c ==================================================================
-@node Configuring a Linux system, Installing tinc, Introduction, Top
-@chapter Configuring a Linux system
+@node Supported platforms, , tinc, Introduction
+@section Supported platforms
+
+tinc works on Linux, FreeBSD and Solaris. These are the three platforms
+that are supported by the universial TUN/TAP device driver, so if
+support for other operating systems is added to this driver, perhaps
+tinc will run on them as well. Without this driver, tinc will most
+likely compile and run, but it will not be able to send or receive data
+packets.
+
+For a more up to date list, please check the list on our website:
+@uref{http://tinc.nl.linux.org/platforms.html}.
+
+
+@c ==================================================================
+@subsection Linux
+
+tinc was first written for Linux running on an intel x86 processor, so
+this is the best supported platform. The protocol however, and actually
+anything about tinc, has been rewritten to support random byte ordering
+and arbitrary word length. So in theory it should run on other
+processors that Linux runs on. Take care however, we haven't been able
+to really test it yet. If you want to run tinc on another platform than
+x86, and want to tell us how it went, please do so.
+
+tinc uses the ethertap device that is provided in the standard kernel
+since version 2.1.60, so anything above that (2.2.x, 2.3.x, and the
+2.4.0-testx (which is current at the time of this writing) kernel
+versions) is able to support tinc.
+
+
+@c ==================================================================
+@subsection FreeBSD
+
+tinc on FreeBSD relies on the universial TUN/TAP driver for its data
+acquisition from the kernel. Therefore, tinc suports the same platforms
+as this driver. These are: FreeBSD 3.x, 4.x, 5.x.
+
+
+@c ==================================================================
+@subsection Solaris
+
+tinc on Solaris relies on the universial TUN/TAP driver for its data
+acquisition from the kernel. Therefore, tinc suports the same platforms
+as this driver. These are: Solaris, 2.1.x.
+
+
+@c
+@c
+@c
+@c
+@c
+@c
+@c Preparing your system
+@c
+@c
+@c
+@c
+@c
-This chapter contains information on how a Linux system is configured
-for the use of tinc.
+@c ==================================================================
+@node Installing tinc - preparations, Installing tinc - installation, Introduction, Top
+@chapter Installing tinc: preparations
+
+This chapter contains information on how to prepare your system to
+support tinc.
@menu
* Configuring the kernel::
-* Files Needed::
-* Setting up the devices::
+* Libraries::
@end menu
@c ==================================================================
-@node Configuring the kernel, Files Needed, Configuring a Linux system, Configuring a Linux system
+@node Configuring the kernel, Libraries, Installing tinc - preparations, Installing tinc - preparations
@section Configuring the kernel
+If you are running Linux, chances are good that your kernel already
+supports all the devices that tinc needs for proper operation. For
+example, the standard kernel from Redhat Linux already has support for
+ethertap and netlink compiled in. Debian users can use the modconf
+utility to select the modules. If your Linux distribution supports this
+method of selecting devices, look out for something called `ethertap',
+and `netlink_dev'. You need both these devices.
+
+If you can install these devices in a similar manner, you may skip this
+section.
+
+@menu
+* Configuration of the Linux kernel::
+* Configuration of the FreeBSD kernel::
+* Configuration of the Solaris kernel::
+@end menu
+
+
+@c ==================================================================
+@node Configuration of the Linux kernel, Configuration of the FreeBSD kernel, Configuring the kernel, Configuring the kernel
+@subsection Configuring the Linux kernel
+
Since this particular implementation only runs on 2.1 or higher Linux
-kernels, you should grab one (2.2 is current at this time). A 2.0 port
+kernels, you should grab one (2.2 is current at this time). A 2.0 port
is not really possible, unless someone tells me someone ported the
ethertap and netlink devices back to 2.0.
If you are unfamiliar with the process of configuring and compiling a
new kernel, you should read the
@uref{http://howto.linuxberg.com/LDP/HOWTO/Kernel-HOWTO.html, Kernel
-HOWTO} first. Do that now!
+HOWTO} first. Do that now!
-Here are the options you have to turn on/off when configuring a new
+Here are the options you have to turn on when configuring a new
kernel.
+For kernel 2.2.x:
+
@example
Code maturity level options
[*] Prompt for development and/or incomplete code/drivers
<*> Ethertap network tap
@end example
-Any other options not mentioned here are not relevant to tinc. If you
+For kernel 2.3.x and 2.4.x:
+
+@example
+Code maturity level options
+[*] Prompt for development and/or incomplete code/drivers
+Networking options
+[*] Kernel/User netlink socket
+<*> Netlink device emulation
+Network device support
+<*> Universal TUN/TAP device driver support
+@end example
+
+
+Any other options not mentioned here are not relevant to tinc. If you
decide to build any of these as dynamic kernel modules, it's a good idea
to add these lines to @file{/etc/modules.conf}.
alias char-major-36 netlink_dev
@end example
+If you have a 2.4 kernel, you can also choose to use the `Ethertap
+network tap' device. This is marked obsolete, because the universal
+TUN/TAP driver is a newer implementation that is supposed to be used in
+favor of ethertap. For tinc, it doesn't really matter which one you
+choose; based on the device file name, tinc will make the right choice
+about what protocol to use.
+
Finally, after having set up other options, build the kernel and boot
-it. Unfortunately it's not possible to insert these modules in a running
-kernel.
+it. Unfortunately it's not possible to insert these modules in a
+running kernel.
@c ==================================================================
-@node Files Needed, Setting up the devices, Configuring the kernel, Configuring a Linux system
-@section Files Needed
+@node Configuration of the FreeBSD kernel, Configuration of the Solaris kernel, Configuration of the Linux kernel, Configuring the kernel
+@subsection Configuring the FreeBSD kernel
-@subsubheading Device files
+This section will contain information on how to configure your FreeBSD
+kernel to support the universal TUN/TAP device. For 5.0 and 4.1
+systems, this is included in the kernel configuration, for earlier
+systems (4.0 and 3.x), you need to install the universal TUN/TAP driver
+yourself.
+
+Unfortunately somebody still has to write the text.
+
+
+@c ==================================================================
+@node Configuration of the Solaris kernel, , Configuration of the FreeBSD kernel, Configuring the kernel
+@subsection Configuring the Solaris kernel
+
+This section will contain information on how to configure your Solaris
+kernel to support the universal TUN/TAP device. You need to install
+this driver yourself.
+
+Unfortunately somebody still has to write the text.
+
+
+@c ==================================================================
+@node Libraries, , Configuring the kernel, Installing tinc - preparations
+@section Libraries
+
+@cindex requirements
+Before you can configure or build tinc, you need to have the OpenSSL
+library installed on your system. If you try to configure tinc without
+having installed it, configure will give you an error message, and stop.
+
+@menu
+* OpenSSL::
+@end menu
+
+
+@c ==================================================================
+@node OpenSSL, , Libraries, Libraries
+@subsection OpenSSL
+
+@cindex OpenSSL
+For all cryptography-related functions, tinc uses the functions provided
+by the OpenSSL library. We recommend using version 0.9.5 or 0.9.6 of
+this library. Other versions may also work, but we can guarantee
+nothing.
+
+If this library is not installed, you wil get an error when configuring
+tinc for build. Support for running tinc without having OpenSSL
+installed @emph{may} be added in the future.
+
+You can use your operating system's package manager to install this if
+available. Make sure you install the development AND runtime versions
+of this package.
+
+If you have to install OpenSSL manually, you can get the source code
+from @url{http://www.openssl.org/}. Instructions on how to configure,
+build and install this package are included within the package. Please
+make sure you build development and runtime libraries (which is the
+default).
+
+If you installed the OpenSSL libraries from source, it may be necessary
+to let configure know where they are, by passing configure one of the
+--with-openssl-* parameters.
+
+@example
+--with-openssl=DIR OpenSSL library and headers prefix
+--with-openssl-include=DIR OpenSSL headers directory
+ (Default is OPENSSL_DIR/include)
+--with-openssl-lib=DIR OpenSSL library directory
+ (Default is OPENSSL_DIR/lib)
+@end example
+
+
+@c
+@c
+@c
+@c Installing tinc
+@c
+@c
+@c
+@c
+
+@c ==================================================================
+@node Installing tinc - installation, Configuring tinc, Installing tinc - preparations, Top
+@chapter Installing tinc: installation
+
+If you use Redhat or Debian, you may want to install one of the
+precompiled packages for your system. These packages are equipped with
+system startup scripts and sample configurations.
+
+If you don't run either of these systems, or you want to compile tinc
+for yourself, you can use the source. The source is distributed under
+the GNU General Public License (GPL). Download the source from the
+@uref{http://tinc.nl.linux.org/download.html, download page}, which has
+the checksums of these files listed; you may wish to check these with
+md5sum before continuing.
+
+tinc comes in a handy autoconf/automake package, which you can just
+treat the same as any other package. Which is just untar it, type
+`configure' and then `make'.
+
+More detailed instructions are in the file @file{INSTALL}, which is
+included in the source distribution.
+
+@menu
+* Building tinc::
+* System files::
+* Interfaces::
+@end menu
+
+
+@c ==================================================================
+@node Building tinc, System files, Installing tinc - installation, Installing tinc - installation
+@section Building tinc
+
+Detailed instructions on configuring the source and building tinc can be
+found in the file called @file{INSTALL}.
+
+
+@c ==================================================================
+@node System files, Interfaces, Building tinc, Installing tinc - installation
+@section System files
+
+Before you can run tinc, you
+
+@menu
+* Device files::
+* Other files::
+@end menu
+
+
+@c ==================================================================
+@node Device files, Other files, System files, System files
+@subsection Device files
First, you'll need the special device file(s) that form the interface
between the kernel and the daemon.
+The permissions for these files have to be such that only the super user
+may read/write to this file. You'd want this, because otherwise
+eavesdropping would become a bit too easy. This does, however, imply
+that you'd have to run tincd as root.
+
+If you use the universal TUN/TAP driver, you have to create the
+following device files (unless they already exist):
+
+@example
+mknod -m 600 /dev/... c .. ..
+chown 0.0 /dev/...
+@end example
+
+If you want to have more devices, the device numbers will be .. .. ...
+
+If you use Linux, and you run the new 2.4 kernel using the devfs
+filesystem, then the tap device will be automatically generated as
+@file{/dev/netlink/tap0}.
+
+If you use Linux and have kernel 2.2.x, you have to make the ethertap
+devices:
+
@example
mknod -m 600 /dev/tap0 c 36 16
chown 0.0 /dev/tap0
@end example
-The permissions now will be such that only the super user may read/write
-to this file. You'd want this, because otherwise eavesdropping would
-become a tad too easy. This does, however, imply that you'd have to run
-tincd as root.
+Any further ethertap devices have minor device number 16 through 31.
-If you want to, you may also create more device files, which would be
-numbered 0...15, with minor device numbers 16...31. They all should be
-owned by root and have permission 600.
+@c ==================================================================
+@node Other files, , Device files, System files
+@subsection Other files
@subsubheading @file{/etc/networks}
-You may add a line to @file{/etc/networks} so that your vpn will get a
-symbolic name. For example:
+You may add a line to @file{/etc/networks} so that your VPN will get a
+symbolic name. For example:
@example
myvpn 10.0.0.0
@end example
+This has nothing to do with the MyVPNIP configuration variable that will be
+discussed later, it is only to make the output of the route command more
+legible.
@subsubheading @file{/etc/services}
-You may add this line to @file{/etc/services}. The effect is that you
-may supply a @samp{vpn} as a valid port number to some programs. The
+You may add this line to @file{/etc/services}. The effect is that you
+may supply a @samp{tinc} as a valid port number to some programs. The
number 655 is registered with the IANA.
@example
@c ==================================================================
-@node Setting up the devices, , Files Needed, Configuring a Linux system
-@section Setting up the devices
+@node Interfaces, , System files, Installing tinc - installation
+@section Interfaces
Before you can start transmitting data over the tinc tunnel, you must
set up the ethertap network devices.
First, decide which IP addresses you want to have associated with these
-devices, and what network mask they must have. You also need these
-numbers when you are going to configure tinc itself. @xref{Configuring
+devices, and what network mask they must have. You also need these
+numbers when you are going to configure tinc itself. @xref{Configuring
tinc}.
It doesn't matter much which part you do first, setting up the network
-devices or configure tinc. But they both have to be done before you try
+devices or configure tinc. But they both have to be done before you try
to start a tincd.
The actual setup of the ethertap device is quite simple, just repeat
after me:
@example
-ifconfig tap@emph{n} hw ether fe:fd:@emph{xx}:@emph{xx}:@emph{xx}:@emph{xx}
+ifconfig tap@emph{n} hw ether fe:fd:00:00:00:00
@end example
-The @emph{n} here is the number of the ethertap device you want to
-use. It should be the same @emph{n} as the one you use for
-@file{/dev/tap@emph{n}}. The @emph{xx}s are four hexadecimal numbers
-(0--ff). With previous versions of tincd, it didn't matter what they
-were. But newer kernels require properly set up ethernet addresses.
-In fact, the old behavior was wrong. It is required that the @emph{xx}s
-match MyOwnVPNIP.
+@cindex MAC address
+@cindex hardware address
+@strong{Note:} Since version 1.0pre3, all interface addresses are set to
+this address, whereas previous versions required the MAC to match the
+actual IP address.
+
+@cindex ifconfig
+To activate the device, you have to assign an IP address to it. To set
+an IP address @emph{IP} with network mask @emph{mask}, do the following:
@example
-ifconfig tap@emph{n} @emph{IP} netmask @emph{mask}
+ifconfig tap@emph{n} @emph{xx}.@emph{xx}.@emph{xx}.@emph{xx} netmask @emph{mask}
@end example
-This will activate the device with an IP address @emph{IP} with network
-mask @emph{mask}.
-
+@cindex netmask
+The netmask is the mask of the @emph{entire} VPN network, not just your
+own subnet. It is the same netmask you will have to specify with the
+VpnMask configuration variable.
-@c ==================================================================
-@node Installing tinc, Configuring tinc, Configuring a Linux system, Top
-@chapter Installing tinc
-
-First download it. This is the
-@uref{http://tinc.nl.linux.org/download.html, download
-page}, which has the checksums of these files listed; you may wish to
-check these with md5sum before continuing.
-
-tinc comes in a handy autoconf/automake package, which you can just
-treat the same as any other package. Which is just untar it, type
-`configure' and then `make'.
-
-More detailed instructions are in the file @file{INSTALL}, which is
-included in the source distribution.
+@c
+@c
+@c
+@c
+@c Configuring tinc
+@c
+@c
+@c
+@c
@c ==================================================================
-@node Configuring tinc, Running tinc, Installing tinc, Top
+@node Configuring tinc, Running tinc, Installing tinc - installation, Top
@chapter Configuring tinc
@menu
* Example::
@end menu
-
@c ==================================================================
@node Multiple networks, How connections work, Configuring tinc, Configuring tinc
@section Multiple networks
However, in its default form, you will soon notice that you can't use
two different configuration files without the -c option.
-We have thought of another way of dealing with this: network names. This
+We have thought of another way of dealing with this: network names. This
means that you call tincd with the -n argument, which will assign a name
to this daemon.
The effect of this is that the daemon will set its configuration
``root'' to /etc/tinc/nn/, where nn is your argument to the -n
-option. You'll notice that it appears in syslog as ``tincd.nn''.
+option. You'll notice that it appears in syslog as ``tinc.nn''.
However, it is not strictly necessary that you call tinc with the -n
-option. In this case, the network name would just be empty, and it will
-be used as such. tinc now looks for files in /etc/tinc/, instead of
-/etc/tinc/nn/; the configuration file should be /etc/tinc/tincd.conf,
+option. In this case, the network name would just be empty, and it will
+be used as such. tinc now looks for files in /etc/tinc/, instead of
+/etc/tinc/nn/; the configuration file should be /etc/tinc/tinc.conf,
and the passphrases are now expected to be in /etc/tinc/passphrases/.
But it is highly recommended that you use this feature of tinc, because
-it will be so much clearer whom your daemon talks to. Hence, we will
+it will be so much clearer whom your daemon talks to. Hence, we will
assume that you use it.
Before going on, first a bit on how tinc sees connections.
When tinc starts up, it reads in the configuration file and parses the
-command-line options. If it sees a `ConnectTo' value in the file, it
-will try to connect to it, on the given port. If this fails, tinc exits.
+command-line options. If it sees a `ConnectTo' value in the file, it
+will try to connect to it, on the given port. If this fails, tinc exits.
@c ==================================================================
@section Configuration file
The actual configuration of the daemon is done in the file
-@file{/etc/tinc/nn/tincd.conf}.
+@file{/etc/tinc/nn/tinc.conf}.
This file consists of comments (lines started with a #) or assignments
in the form of
@end example
The variable names are case insensitive, and any spaces, tabs, newlines
-and carriage returns are ignored. Note: it is not required that you put
+and carriage returns are ignored. Note: it is not required that you put
in the `=' sign, but doing so improves readability. If you leave it
out, remember to replace it with at least one space character.
@node Variables, , Configuration file, Configuration file
@subsection Variables
-Here are all valid variables, listed in alphabetical order:
+Here are all valid variables, listed in alphabetical order. The default
+value, required or optional is given between parentheses.
@c straight from the manpage
@table @asis
-@item AllowConnect = (yes|no)
-If set to yes, anyone may try to connect to you. If you set this to no,
-no incoming connections will be accepted. This does not affect the
-outgoing connections.
-
-@item ConnectPort = port
+@item ConnectPort = <port> (655)
Connect to the upstream host (given with the ConnectTo directive) on
-port port. port may be given in decimal (default), octal (when preceded
+port port. port may be given in decimal (default), octal (when preceded
by a single zero) or hexadecimal (prefixed with 0x). port is the port
number for both the UDP and the TCP (meta) connections.
-@item ConnectTo = (IP address|hostname)
-Specifies which host to connect to on startup. If the ConnectPort
-variable is omitted, then tinc will try to connect to port 655.
+@item ConnectTo = <IP address|hostname> (optional)
+Specifies which host to connect to on startup. Multiple ConnectTo variables
+may be specified, if connecting to the first one fails then tinc will try
+the next one, and so on. It is possible to specify hostnames for dynamic IP
+addresses (like those given on dyndns.org), tinc will not cache the resolved
+IP address.
If you don't specify a host with ConnectTo, regardless of whether a
value for ConnectPort is given, tinc won't connect at all, and will
-instead just listen for incoming connections. Only the initiator of a
-tinc VPN should need this.
-
-@item ListenPort = port
-Listen on local port port. The computer connecting to this daemon should
-use this number as the argument for his ConnectPort. Again, the
-default is 655.
-
-@item MyOwnVPNIP = local address[/maskbits]
+instead just listen for incoming connections.
+
+@item Hostnames = <yes|no> (no)
+This option selects whether IP addresses (both real and on the VPN) should
+be resolved. Since DNS lookups are blocking, it might affect tinc's
+efficiency, even stopping the daemon for a few seconds everytime it does
+a lookup if your DNS server is not responding.
+
+This does not affect resolving hostnames to IP addresses from the configuration
+file.
+
+@item IndirectData = <yes|no> (no)
+This option specifies whether other tinc daemons besides the one you
+specified with ConnectTo can make a direct connection to you. This is
+especially useful if you are behind a firewall and it is impossible
+to make a connection from the outside to your tinc daemon. Otherwise,
+it is best to leave this option out or set it to no.
+
+@item Interface = <device> (optional)
+If you have more than one network interface in your computer, tinc will by
+default listen on all of them for incoming connections. It is possible to
+bind tinc to a single interface like eth0 or ppp0 with this variable.
+
+@item InterfaceIP = <local address> (optional)
+If your computer has more than one IP address on a single interface (for example
+if you are running virtual hosts), tinc will by default listen on all of them for
+incoming connections. It is possible to bind tinc to a single IP address with
+this variable. It is still possible to listen on several interfaces at the same
+time though, if they share the same IP address.
+
+@item KeyExpire = <seconds> (3600)
+This option controls the time the encryption keys used to encrypt the data
+are valid. It is common practice to change keys at regular intervals to
+make it even harder for crackers, even though it is thought to be nearly
+impossible to crack a single key.
+
+@item ListenPort = <port> (655)
+Listen on local port port. The computer connecting to this daemon should
+use this number as the argument for his ConnectPort.
+
+@item MyOwnVPNIP = <local address[/maskbits]> (required)
The local address is the number that the daemon will propagate to
-other daemons on the network when it is identifying itself. Hence this
+other daemons on the network when it is identifying itself. Hence this
will be the file name of the passphrase file that the other end expects
to find the passphrase in.
The local address is the IP address of the tap device, not the real IP
-address of the host running tincd. Due to changes in recent kernels, it
+address of the host running tincd. Due to changes in recent kernels, it
is also necessary that you make the ethernet (also known as MAC) address
equal to the IP address (see the example).
maskbits is the number of bits set to 1 in the netmask part.
-@item MyVirtualIP = local address[/maskbits]
+@item MyVirtualIP = <local address[/maskbits]>
This is an alias for MyOwnVPNIP.
-@item Passphrases = directory
-The directory where tinc will look for passphrases when someone tries to
-connect. Please see the manpage for genauth(8) for more information
-about passphrases as used by tinc.
-
-@item PingTimeout = number
+@item PingTimeout = <seconds> (5)
The number of seconds of inactivity that tinc will wait before sending a
-probe to the other end. If that other end doesn't answer within that
+probe to the other end. If that other end doesn't answer within that
same amount of seconds, the connection is terminated, and the others
will be notified of this.
-@item TapDevice = device
-The ethertap device to use. Note that you can only use one device per
-daemon. The info pages of the tinc package contain more information
+@item PrivateKey = <key>
+This is a sequence of hexadecimal numbers, as generated by ``tincd
+--generate-keys''. Please be careful with line breaking, the entire key
+should be on one line.
+
+@item PublicKey = <key>
+This is a sequence of hexadecimal numbers, as generated by ``tincd
+--generate-keys''. Please be careful with line breaking, the entire key
+should be on one line.
+
+@item TapDevice = <device> (/dev/tap0)
+The ethertap device to use. Note that you can only use one device per
+daemon. The info pages of the tinc package contain more information
about configuring an ethertap device for Linux.
+@item TCPonly = <yes|no> (no, experimental)
+If this variable is set to yes, then the packets are tunnelled over a TCP
+connection instead of a UDP connection. This is especially useful for those
+who want to run a tinc daemon from behind a masquerading firewall, or if
+UDP packet routing is disabled somehow. This is experimental code,
+try this at your own risk.
+
+@item VpnMask = <mask> (optional)
+The mask that defines the scope of the entire VPN. This option is not used
+by the tinc daemon itself, but can be used by startup scripts to configure
+the ethertap devices correctly.
@end table
+
@c ==================================================================
@node Example, , Configuration file, Configuring tinc
@section Example
-Imagine the following situation. An A-based company wants to connect
-three branch offices in B, C and D using the internet. All four offices
+
+Imagine the following situation. An A-based company wants to connect
+three branch offices in B, C and D using the internet. All four offices
have a 24/7 connection to the internet.
-A is going to serve as the center of the network. B and C will connect
-to A, and D will connect to C. Each office will be assigned their own IP
+A is going to serve as the center of the network. B and C will connect
+to A, and D will connect to C. Each office will be assigned their own IP
network, 10.x.0.0.
@example
@end example
``gateway'' is the VPN IP address of the machine that is running the
-tincd. ``internet IP'' is the IP address of the firewall, which does not
+tincd. ``internet IP'' is the IP address of the firewall, which does not
need to run tincd, but it must do a port forwarding of TCP&UDP on port
655 (unless otherwise configured).
In this example, it is assumed that eth0 is the interface that points to
-the inner LAN of the office. This could be the same as the interface
-that leads to the internet.
+the inner LAN of the office, although this could also be the same as the
+interface that leads to the internet. The configuration of the real
+interface is also shown as a comment, to give you an idea of how these
+example host is set up.
@subsubheading For A
@emph{A} would be configured like this:
@example
+#ifconfig eth0 10.1.54.1 netmask 255.255.0.0 broadcast 10.1.255.255
ifconfig tap0 hw ether fe:fd:0a:01:36:01
ifconfig tap0 10.1.54.1 netmask 255.0.0.0
-ifconfig eth0 10.1.54.1 netmask 255.255.0.0 broadcast 10.1.255.255
@end example
-and in /etc/tinc/tincd.conf:
+and in /etc/tinc/tinc.conf:
@example
TapDevice = /dev/tap0
MyVirtualIP = 10.1.54.1/16
+VpnMask = 255.0.0.0
@end example
@subsubheading For B
@example
+#ifconfig eth0 10.2.43.8 netmask 255.255.0.0 broadcast 10.2.255.255
ifconfig tap0 hw ether fe:fd:0a:02:01:0c
ifconfig tap0 10.2.1.12 netmask 255.0.0.0
-ifconfig eth0 10.2.43.8 netmask 255.255.0.0 broadcast 10.2.255.255
@end example
-and in /etc/tinc/tincd.conf:
+and in /etc/tinc/tinc.conf:
@example
TapDevice = /dev/tap0
MyVirtualIP = 10.2.1.12/16
ConnectTo = 1.2.3.4
-AllowConnect = no
+VpnMask = 255.0.0.0
@end example
Note here that the internal address (on eth0) doesn't have to be the
-same as on the tap0 device. Also, ConnectTo is given so that no-one can
+same as on the tap0 device. Also, ConnectTo is given so that no-one can
connect to this node.
@subsubheading For C
@example
+#ifconfig eth0 10.3.69.254 netmask 255.255.0.0 broadcast 10.3.255.255
ifconfig tap0 hw ether fe:fd:0a:03:45:fe
ifconfig tap0 10.3.69.254 netmask 255.0.0.0
-ifconfig eth0 10.3.69.254 netmask 255.255.0.0 broadcast 10.3.255.255
@end example
-and in /etc/tinc/A/tincd.conf:
+and in /etc/tinc/A/tinc.conf:
@example
MyVirtualIP = 10.3.69.254/16
+TapDevice = /dev/tap1
ConnectTo = 1.2.3.4
ListenPort = 2000
+VpnMask = 255.0.0.0
@end example
C already has another daemon that runs on port 655, so they have to
-reserve another port for tinc. They also use the netname to distinguish
-between the two. tinc is started with `tincd -n A'.
+reserve another port for tinc. It can connect to other tinc daemons on
+the regular port though, so no ConnectPort variable is needed.
+They also use the netname to distinguish
+between the two. tinc is started with `tincd -n A'.
@subsubheading For D
@example
+#ifconfig tap0 10.4.3.32 netmask 255.255.0.0 broadcast 10.4.255.255
ifconfig tap0 hw ether fe:fd:0a:04:03:20
ifconfig tap0 10.4.3.32 netmask 255.0.0.0
-ifconfig tap0 10.4.3.32 netmask 255.255.0.0 broadcast 10.4.255.255
@end example
-and in /etc/tinc/tincd.conf:
+and in /etc/tinc/tinc.conf:
@example
MyVirtualIP = 10.4.3.32/16
ConnectTo = 3.4.5.6
ConnectPort = 2000
-AllowConnect = no
+VpnMask=255.0.0.0
@end example
D will be connecting to C, which has a tincd running for this network on
-port 2000. Hence they need to put in a ConnectPort.
+port 2000. Hence they need to put in a ConnectPort, but it doesn't need
+to have a different ListenPort.
@subsubheading Authentication
stored in /etc/tinc/passphrases/local, except for C, where it should be
/etc/tinc/A/passphrases/local.
-A stores a copy of B's passphrase in /etc/tinc/passphrases/10.2.0.0
+A stores a copy of B's passphrase in /etc/tinc/passphrases/10.2.1.12
-A stores a copy of C's passphrase in /etc/tinc/passphrases/10.3.0.0
+A stores a copy of C's passphrase in /etc/tinc/passphrases/10.3.69.254
-B stores a copy of A's passphrase in /etc/tinc/passphrases/10.1.0.0
+B stores a copy of A's passphrase in /etc/tinc/passphrases/10.1.54.1
-C stores a copy of A's passphrase in /etc/tinc/A/passphrases/10.1.0.0
+C stores a copy of A's passphrase in /etc/tinc/A/passphrases/10.1.54.1
-C stores a copy of D's passphrase in /etc/tinc/A/passphrases/10.4.0.0
+C stores a copy of D's passphrase in /etc/tinc/A/passphrases/10.4.3.32
-D stores a copy of C's passphrase in /etc/tinc/passphrases/10.3.0.0
+D stores a copy of C's passphrase in /etc/tinc/passphrases/10.3.69.254
@subsubheading Starting
-A has to start their tincd first. Then come B and C, where C has to
+A has to start their tincd first. Then come B and C, where C has to
provide the option `-n A', because they have more than one tinc
-network. Finally, D's tincd is started.
+network. Finally, D's tincd is started.
@chapter Running tinc
Running tinc isn't just as easy as typing `tincd' and hoping everything
-will just work out the way you wanted. Instead, the use of tinc is a
+will just work out the way you wanted. Instead, the use of tinc is a
project that involves trust relations and more than one computer.
@menu
@node Managing keys, Runtime options, Running tinc, Running tinc
@section Managing keys
-Before attempting to start tinc, you have to create passphrases. When
+Before attempting to start tinc, you have to create passphrases. When
tinc tries to make a connection, it exchanges some sensitive
-data. Before doing so, it likes to know if the other end is
+data. Before doing so, it likes to know if the other end is
trustworthy.
-To do this, both ends must have some knowledge about the other. In the
+To do this, both ends must have some knowledge about the other. In the
case of tinc this is the authentication passphrase.
-This passphrase is a number, which is chosen at random. This number is
-then sent to the other computers which want to talk to us directly. To
+This passphrase is a number, which is chosen at random. This number is
+then sent to the other computers which want to talk to us directly. To
avoid breaking security, this should be done over a known secure channel
(such as ssh or similar).
normally /etc/tinc/nn/passphrases/, but it may be changed using the
`Passphrases' option in the config file.
-To generate a passphrase, run `genauth'. genauth takes one argument,
-which is the length of the passphrase in bits. The length of the
+To generate a passphrase, run `genauth'. genauth takes one argument,
+which is the length of the passphrase in bits. The length of the
passphrase should be in the range 1024--2048 for a key length of 128
-bits. genauth creates a random number of the specified length, and puts
+bits. genauth creates a random number of the specified length, and puts
it to stdout.
Every computer that wants to participate in the VPN should do this, and
store the output in the passphrases directory, in the file @file{local}.
When every computer has his own local key, it should copy it to the
-computer that it wants to talk to directly. (i.e. the one it connects to
+computer that it wants to talk to directly. (i.e. the one it connects to
during startup.) This should be done via a secure channel, because it is
-sensitive information. If this is not done securely, someone might break
+sensitive information. If this is not done securely, someone might break
in on you later on.
Those non-local passphrase files must have the name of the VPN IP
-address that they will advertise to you. For instance, if a computer
+address that they will advertise to you. For instance, if a computer
tells us it likes to be 10.1.1.3 with netmask 255.255.0.0, the file
should still be called 10.1.1.3, and not 10.1.0.0.
Besides the settings in the configuration file, tinc also accepts some
command line options.
-This list is a longer version of that in the manpage. The latter is
+This list is a longer version of that in the manpage. The latter is
generated automatically, so may be more up-to-date.
@c from the manpage
@table @asis
@item -c, --config=FILE
-Read configuration options from FILE. The default is
-@file{/etc/tinc/nn/tincd.conf}.
+Read configuration options from FILE. The default is
+@file{/etc/tinc/nn/tinc.conf}.
@item -d
-Increase debug level. The higher it gets, the more gets
-logged. Everything goes via syslog.
+Increase debug level. The higher it gets, the more gets
+logged. Everything goes via syslog.
0 is the default, only some basic information connection attempts get
-logged. Setting it to 1 will log a bit more, still not very
-disturbing. With two -d's tincd will log protocol information, which can
-get pretty noisy. Three or more -d's will output every single packet
+logged. Setting it to 1 will log a bit more, still not very
+disturbing. With two -d's tincd will log protocol information, which can
+get pretty noisy. Three or more -d's will output every single packet
that goes out or comes in, which probably generates more data than the
packets themselves.
@item -k, --kill
-Attempt to kill a running tincd and exit. A TERM signal (15) gets sent
-to the daemon that his its PID in /var/run/tincd.nn.pid.
+Attempt to kill a running tincd and exit. A TERM signal (15) gets sent
+to the daemon that his its PID in /var/run/tinc.nn.pid.
Because it kills only one tincd, you should use -n here if you use it
normally.
@item -n, --net=NETNAME
-Connect to net NETNAME. @xref{Multiple networks}.
+Connect to net NETNAME. @xref{Multiple networks}.
@item -t, --timeout=TIMEOUT
-Seconds to wait before giving a timeout. Should not be set too low,
+Seconds to wait before giving a timeout. Should not be set too low,
because every time tincd senses a timeout, it disconnects and reconnects
again, which will cause unnecessary network traffic and log messages.
@menu
* The Connection::
* Security::
-* The Protocol::
@end menu
@node The Connection, Security, Technical information, Technical information
@cindex ethertap
@cindex frame type
The data itself is read from a character device file, the so-called
-@emph{ethertap} device. This device is associated with a network
-interface. Any data sent to this interface can be read from the device,
-and any data written to the device gets sent from the interface. Data to
+@emph{ethertap} device. This device is associated with a network
+interface. Any data sent to this interface can be read from the device,
+and any data written to the device gets sent from the interface. Data to
and from the device is formatted as if it were a normal ethernet card,
so a frame is preceded by two MAC addresses and a @emph{frame type}
field.
So when tinc reads an ethernet frame from the device, it determines its
-type. Right now, tinc can only handle Internet Protocol version 4 (IPv4)
-frames. Plans to support other protocols are being made. When tinc knows
+type. Right now, tinc can only handle Internet Protocol version 4 (IPv4)
+frames. Plans to support other protocols are being made. When tinc knows
which type of frame it has read, it can also read the source and
destination address from it.
-Now it is time that the frame gets encrypted. Currently the only
+Now it is time that the frame gets encrypted. Currently the only
encryption algorithm available is blowfish.
@cindex encapsulating
When the encryption is ready, time has come to actually transport the
-packet to the destination computer. We do this by sending the packet
-over an UDP connection to the destination host. This is called
+packet to the destination computer. We do this by sending the packet
+over an UDP connection to the destination host. This is called
@emph{encapsulating}, the VPN packet (though now encrypted) is
encapsulated in another IP datagram.
When the destination receives this packet, the same thing happens, only
-in reverse. So it does a decrypt on the contents of the UDP datagram,
+in reverse. So it does a decrypt on the contents of the UDP datagram,
and it writes the decrypted information to its own ethertap device.
@node The Meta-connection, , Protocol Preview, The Connection
@subsection The meta-connection
-Having only a UDP connection available is not enough. Though suitable
+Having only an UDP connection available is not enough. Though suitable
for transmitting data, we want to be able to reliably send other
information, such as routing and encryption information to somebody.
TCP is a better alternative, because it already contains protection
against information being lost, unlike UDP.
-So we establish two connections. One for the encrypted VPN data, and one
-for other information, the meta-data. Hence, we call the second
-connection the meta-connection. We can now be sure that the
+So we establish two connections. One for the encrypted VPN data, and one
+for other information, the meta-data. Hence, we call the second
+connection the meta-connection. We can now be sure that the
meta-information doesn't get lost on the way to another computer.
@cindex data-protocol
@cindex meta-protocol
Like with any communication, we must have a protocol, so that everybody
-knows what everything stands for, an how he should react. Because we
-have two connections, we also have two protocols. The protocol used for
+knows what everything stands for, an how he should react. Because we
+have two connections, we also have two protocols. The protocol used for
the UDP data is the ``data-protocol,'' the other one is the
``meta-protocol.''
+The reason we don't use TCP for both protocols is that UDP is much
+better for encapsulation, even while it is less reliable. The real
+problem is that when TCP would be used to encapsulate a TCP stream
+that's on the private network, for every packet sent there would be
+three ACK's sent instead of just one. Furthermore, if there would be
+a timeout, both TCP streams would sense the timeout, and both would
+start resending packets.
@c ==================================================================
-@node Security, The Protocol, The Connection, Technical information
+@node Security, , The Connection, Technical information
@section About tinc's encryption and other security-related issues.
@cindex tinc
@cindex Cabal
tinc got its name from ``TINC,'' short for @emph{There Is No Cabal}; the
alleged Cabal was/is an organization that was said to keep an eye on the
-entire Internet. As this is exactly what you @emph{don't} want, we named
+entire Internet. As this is exactly what you @emph{don't} want, we named
the tinc project after TINC.
@cindex SVPN
But in order to be ``immune'' to eavesdropping, you'll have to encrypt
-your data. Because tinc is a @emph{Secure} VPN (SVPN) daemon, it does
+your data. Because tinc is a @emph{Secure} VPN (SVPN) daemon, it does
exactly that: encrypt.
This chapter is a mixture of ideas, reasoning and explanation, please
don't take it too serious.
@menu
+* Key Types::
* Key Management::
* Authentication::
* Protection::
@end menu
+@c ==================================================================
+@node Key Types, Key Management, Security, Security
+@subsection Key Types
+@c FIXME: check if I'm not talking nonsense
+
+There are several types of encryption keys. Tinc uses two of them,
+symmetric private keypairs and public/private keypairs.
+
+Public/private keypairs are used in public key cryptography. It enables
+someone to send out a public key with which other people can encrypt their
+data. The encrypted data now can only be decrypted by the person who has
+the private key that matches the public key. So, a public key only allows
+@emph{other} people to send encrypted messages to you. This is very useful
+in setting up private communications channels. Just send out your public key
+and other people can talk to you in a secure way. But how can you know
+the other person is who he says he is?
+
+For authentication itself tinc uses symmetric private keypairs, referred
+to as a passphrase. The identity of each tinc daemon is defined by it's
+passphrase (like you can be identified by your social security number).
+Every tinc daemon that is allowed to connect to you has a copy of your
+passphrase (hence symmetrical).
+
+It would also be possible to use public/private keypairs for authentication,
+so that you could shout out your public key and don't need to keep it
+secret (like the passphrase you would have to send to someone else). Also,
+no one else has to know a private key from you.
+Both forms have their pros and cons, and at the moment tinc just uses passphrases
+(which are computationaly more efficient and perhaps in some way more
+secure).
@c ==================================================================
-@node Key Management, Authentication, Security, Security
+@node Key Management, Authentication, Key Types, Security
@subsection Key Management
-@c FIXME: recheck
+@c FIXME change for the current protocol
@cindex Diffie-Hellman
You can't just send a private encryption key to your peer, because
-somebody else might already be listening to you. So you'll have to
-negotiate over a shared but secret key. One way to do this is by using
+somebody else might already be listening to you. So you'll have to
+negotiate over a shared but secret key. One way to do this is by using
the ``Diffie-Hellman key exchange'' protocol
-(@uref{http://www.rsa.com/rsalabs/faq/html/3-6-1.html}). The idea is as
+(@uref{http://www.rsa.com/rsalabs/faq/html/3-6-1.html}). The idea is as
follows.
You have two participants A and B that want to agree over a shared
-secret encryption key. Both parties have some large prime number p and a
-generator g. These numbers may be known to the outside world, and hence
+secret encryption key. Both parties have some large prime number p and a
+generator g. These numbers may be known to the outside world, and hence
may be included in the source distribution.
@cindex secret key
-Both parties then generate a secret key. A generates a, and computes g^a
-mod p. This is then sent to B; while B computes g^b mod p, and transmits
-this to A, b being generated by B. Both a and b must be smaller than
+Both parties then generate a secret key. A generates a, and computes g^a
+mod p. This is then sent to B; while B computes g^b mod p, and transmits
+this to A, b being generated by B. Both a and b must be smaller than
p-1.
-These private keys are generated upon startup, and they are not changed
-while the connection exists. A possible feature in the future is to
-dynamically change the keys, every hour for example.
-
-Both parties then calculate g^ab mod p = k. k is the new, shared, but
+Both parties then calculate g^ab mod p = k. k is the new, shared, but
still secret key.
To obtain a key k of a sufficient length (128 bits in our vpnd), p
system.
We will let A transmit a passphrase that is also known to B encrypted
-with g^a, before A sends this to B. This way, B can check whether A is
+with g^a, before A sends this to B. This way, B can check whether A is
really A or just someone else.
+B will never receive the real passphrase though, because it was
+encrypted using public/private keypairs. This way there is no way an
+imposter could steal A's passphrase.
@cindex passphrase
+@c ehrmz... but we only use 1024 bits passphrases ourselves? [guus]
This passphrase should be 2304 bits for a symmetric encryption
-system. But since an asymmetric system is more secure, we could do with
-2048 bits. This only holds if the passphrase is very random.
+system. But since an asymmetric system is more secure, we could do with
+2048 bits. This only holds if the passphrase is very random.
These passphrases could be stored in a file that is non-readable by
-anyone else but root; e.g. @file{/etc/vpn/passphrases}.
+anyone else but root; e.g. @file{/etc/tinc/passphrases} with UID 0
+and permissions mode 700.
-The only thing that needs to be taken care of is how A announces its
-passphrase to B.
+The only thing that needs to be taken care of is how A can securely send
+a copy of it's passphrase to B if B doesn't have it yet. This could be
+done via mail with PGP, but you should be really convinced of the
+identity of the person who owns the email address you are sending this to.
+Swapping floppy disks in real life might be the best way to do this!
@c ==================================================================
@node Protection, , Authentication, Security
@subsection Protecting your data
-Now we have securely hidden our data. But a malicious cracker may still
+Now we have securely hidden our data. But a malicious cracker may still
bother you by randomly altering the encrypted data he intercepts.
-
-@c ==================================================================
-@node The Protocol, , Security, Technical information
-@section Detailed protocol specifications
-
-
-
-@menu
-* Data protocol::
-* Meta protocol::
-@end menu
-
-@c ==================================================================
-@node Data protocol, Meta protocol, The Protocol, The Protocol
-@subsection The data protocol
-
-The data that is sent through the UDP connection is formatted as follows:
-
-@example
-
- bytes | Contents
-----------------------
- 0-1 | The length of this packet, including all leading fields
- 2-5 | The destination IP address
- 6-... | The encrypted data
-
-@end example
-
-The method that was used to encrypt the data should be made known via
-the meta-protocol, during early identification stages.
-
-
-@c ==================================================================
-@node Meta protocol, , Data protocol, The Protocol
-@subsection The Meta protocol
-
-This protocol consists of separate packets of information, that are
-generally formatted thusly:
-
-@example
-
- bytes | Contents
-----------------------
- 0 | The request ID
- 1-... | (Optional: arguments)
-
-@end example
-
-What follows is a listing of possible request IDs.
-
-@table @samp
-@item ACK
-Acknowledge. This generally means that the authentication has been
-accepted by the remote computer. Takes no arguments.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `1'
-
-@end example
-
-@item AUTH_S_INIT
-@itemx AUTH_C_INIT
-Obsolete. Use @samp{BASIC_INFO}.
-
-@item AUTH_S_SPP
-@itemx AUTH_C_SPP
-Obsolete. Use @samp{PASSPHRASE}.
-
-@item AUTH_S_SKEY
-@itemx AUTH_C_SKEY
-Obsolete. Use @samp{PUBLIC_KEY}, @samp{REQ_KEY} and @samp{ANS_KEY}.
-
-@item AUTH_S_SACK
-@itemx AUTH_C_RACK
-Obsolete. Use @samp{ACK}.
-
-@item TERMREQ
-A request to terminate this connection, for whatever reason.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `30'
- 1-4 | The VPN IP address of the host that has exited
-
-@end example
-
-
-@item PINGTIMEOUT
-Terminate connection, but the reason must be a ping timeout.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `31'
- 1-4 | The VPN IP address of the host that has exited
-
-@end example
-
-
-@item PING
-Send probe to the other end, if he hasn't returned a @samp{PONG} within
-10 seconds, the connection is considered to be dead and will be
-terminated, we should try to notify the other by sending a
-@samp{PINGTIMEOUT} packet.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `40'
-
-@end example
-
-
-@item PONG
-See explanation for @samp{PING}
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `41'
-
-@end example
-
-
-@item ADD_HOST
-Send an @samp{ADD_HOST} packet if you want to propagate all your current
-connections to a new computer on a network. If we get this request, we
-must forward it to everyone that hasn't got it yet.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `60'
- 1-4 | The real IP address of the new host
- 5-8 | The VPN IP address of the new host
- 9-12 | The VPN netmask
- 13-14 | The port number that the new host listens on
-
-@end example
-
-
-@item BASIC_INFO
-This packet will contain all necessary basic information about
-ourselves, such as the port we listen on and our desired VPN IP address.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `61'
- 1 | The protocol version.
- | This chapter describes version 4.
- 2-3 | The port number that the new host listens on
- 4-7 | The VPN IP address of the new host
- 8-11 | The VPN netmask
-
-@end example
-
-
-@item PASSPHRASE
-Send an encrypted passphrase. Should be encrypted with our
-@strong{public} key, and it must reach us before a @samp{PUBLIC_KEY}
-request.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `62'
- 1-2 | The length of the encrypted passphrase
- 3-... | The encrypted passphrase
-
-@end example
-
-
-@item PUBLIC_KEY
-This is only used during authentication of a new connection, later on we
-may use @samp{REQ_KEY} and @samp{ANS_KEY}.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `63'
- 1-2 | The length of the key
- 3-... | The public key, given in base-36
-
-@end example
-
-
-@item HOLD
-@itemx RESUME
-Unused.
-
-@item CALCULATE
-@itemx CALC_RES
-@itemx ALMOST_KEY
-Never been in use.
-
-@item REQ_KEY
-Request a public key from someone and return it to the sender of this
-request using a @samp{ANS_KEY} packet. If we get such request, we must
-forward it to the connection that leads to the destination.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `160'
- 1-4 | The source VPN IP address
- 5-8 | The destination VPN IP address
- 9-14 | `0'
-
-@end example
-
-
-@item ANS_KEY
-Answer to a @samp{REQ_KEY} request, forward it to the destination if it
-is not meant for us.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `161'
- 1-4 | The source VPN IP address
- 5-8 | The destination VPN IP address
- 9-12 | The expiration date/time in seconds
- 13-14 | The key length
- 15-... | The public key in base-36
-
-@end example
-
-
-@item KEY_CHANGED
-The source computer wants to tell that it has regenerated its private
-and public keys, so anything going there must be encrypted with a new
-shared key.
-
-@example
-
- bytes | Contents
-----------------------
- 0 | `162'
- 1-4 | The source VPN IP address
-
-@end example
-
-
-@end table
-
+@c FIXME what the hell is this all about? remove? IT
@c ==================================================================
@node About us, Concept Index, Technical information, Top
tinc's main page is at @url{http://tinc.nl.linux.org/},
this server is located in the Netherlands.
-We have an IRC channel on the Open Projects IRC network. Connect to
+We have an IRC channel on the Open Projects IRC network. Connect to
@uref{http://openprojects.nu/services/irc.html, irc.openprojects.net},
and join channel #tinc.
Originator of it all, co-author.
@item Wessel Dankers (Ubiq)
-General obfuscator of the code.
+General obfuscater of the code.
@end table
projects / tinc / blobdiff