This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon.
-Copyright @copyright{} 1998-2009 Ivo Timmermans,
+Copyright @copyright{} 1998-2011 Ivo Timmermans,
Guus Sliepen <guus@@tinc-vpn.org> and
Wessel Dankers <wsl@@tinc-vpn.org>.
@vskip 0pt plus 1filll
This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon.
-Copyright @copyright{} 1998-2009 Ivo Timmermans,
+Copyright @copyright{} 1998-2011 Ivo Timmermans,
Guus Sliepen <guus@@tinc-vpn.org> and
Wessel Dankers <wsl@@tinc-vpn.org>.
This problem can be solved by using @emph{virtual} networks. Virtual
networks can live on top of other networks, but they use encapsulation to
keep using their private address space so they do not interfere with
-the Internet. Mostly, virtual networks appear like a singe LAN, even though
+the Internet. Mostly, virtual networks appear like a single LAN, even though
they can span the entire world. But virtual networks can't be secured
by using firewalls, because the traffic that flows through it has to go
through the Internet, where other people can look at it.
in the `=' sign, but doing so improves readability. If you leave it
out, remember to replace it with at least one space character.
+The server configuration is complemented with host specific configuration (see
+the next section). Although all host configuration options for the local node
+listed in this document can also be put in
+@file{@value{sysconfdir}/tinc/@var{netname}/tinc.conf}, it is recommended to
+put host specific configuration options in the host configuration file, as this
+makes it easy to exchange with other nodes.
+
In this section all valid variables are listed in alphabetical order.
The default value is given between parentheses,
other comments are between square brackets.
to start with an Ethernet header.
@end table
+@cindex DirectOnly
+@item DirectOnly = <yes|no> (no) [experimental]
+When this option is enabled, packets that cannot be sent directly to the destination node,
+but which would have to be forwarded by an intermediate node, are dropped instead.
+When combined with the IndirectData option,
+packets for nodes for which we do not have a meta connection with are also dropped.
+
+@cindex Forwarding
+@item Forwarding = <off|internal|kernel> (internal) [experimental]
+This option selects the way indirect packets are forwarded.
+
+@table @asis
+@item off
+Incoming packets that are not meant for the local node,
+but which should be forwarded to another node, are dropped.
+
+@item internal
+Incoming packets that are meant for another node are forwarded by tinc internally.
+
+This is the default mode, and unless you really know you need another forwarding mode, don't change it.
+
+@item kernel
+Incoming packets are always sent to the TUN/TAP device, even if the packets are not for the local node.
+This is less efficient, but allows the kernel to apply its routing and firewall rules on them,
+and can also help debugging.
+@end table
+
@cindex GraphDumpFile
@item GraphDumpFile = <@var{filename}> [experimental]
If this option is present,
When this option is used the priority of the tincd process will be adjusted.
Increasing the priority may help to reduce latency and packet loss on the VPN.
+@cindex ReplayWindow
+@item ReplayWindow = <bytes> (16)
+This is the size of the replay tracking window for each remote node, in bytes.
+The window is a bitfield which tracks 1 packet per bit, so for example
+the default setting of 16 will track up to 128 packets in the window. In high
+bandwidth scenarios, setting this to a higher value can reduce packet loss from
+the interaction of replay tracking with underlying real packet loss and/or
+reordering. Setting this to zero will disable replay tracking completely and
+pass all traffic, but leaves tinc vulnerable to replay-based attacks on your
+traffic.
+
+
+@cindex StrictSubnets
+@item StrictSubnets <yes|no> (no) [experimental]
+When this option is enabled tinc will only use Subnet statements which are
+present in the host config files in the local
+@file{@value{sysconfdir}/tinc/@var{netname}/hosts/} directory.
+
@cindex TunnelServer
@item TunnelServer = <yes|no> (no) [experimental]
When this option is enabled tinc will no longer forward information between other tinc daemons,
-and will only allow nodes and subnets on the VPN which are present in the
+and will only allow connections with nodes for which host config files are present in the local
@file{@value{sysconfdir}/tinc/@var{netname}/hosts/} directory.
+Setting this options also implicitly sets StrictSubnets.
+
+@cindex UDPRcvBuf
+@item UDPRcvBuf = <bytes> (OS default)
+Sets the socket receive buffer size for the UDP socket, in bytes.
+If unset, the default buffer size will be used by the operating system.
+
+@cindex UDPSndBuf
+@item UDPSndBuf = <bytes> Pq OS default
+Sets the socket send buffer size for the UDP socket, in bytes.
+If unset, the default buffer size will be used by the operating system.
@end table
@table @asis
@cindex Address
-@item Address = <@var{IP address}|@var{hostname}> [recommended]
+@item Address = <@var{IP address}|@var{hostname}> [<port>] [recommended]
This variable is only required if you want to connect to this host. It
must resolve to the external IP address where the host can be reached,
not the one that is internal to the VPN.
+If no port is specified, the default Port is used.
@cindex Cipher
@item Cipher = <@var{cipher}> (blowfish)
Furthermore, specifying "none" will turn off packet encryption.
It is best to use only those ciphers which support CBC mode.
+@cindex ClampMSS
+@item ClampMSS = <yes|no> (yes)
+This option specifies whether tinc should clamp the maximum segment size (MSS)
+of TCP packets to the path MTU. This helps in situations where ICMP
+Fragmentation Needed or Packet too Big messages are dropped by firewalls.
+
@cindex Compression
@item Compression = <@var{level}> (0)
This option sets the level of compression used for UDP packets.
Note that the IP addresses of eth0 and tap0 are the same.
This is quite possible, if you make sure that the netmasks of the interfaces are different.
-It is in fact recommended to give give both real internal network interfaces and tap interfaces the same IP address,
+It is in fact recommended to give both real internal network interfaces and tap interfaces the same IP address,
since that will make things a lot easier to remember and set up.
@end example
Note here that the internal address (on eth0) doesn't have to be the
-same as on the tap0 device. Also, ConnectTo is given so that no-one can
-connect to this node.
+same as on the tap0 device. Also, ConnectTo is given so that this node will
+always try to connect to BranchA.
On all hosts, in @file{@value{sysconfdir}/tinc/company/hosts/BranchB}:
the service will always be stopped and removed.
@item -n, --net=@var{netname}
-Use configuration for net @var{netname}. @xref{Multiple networks}.
+Use configuration for net @var{netname}.
+This will let tinc read all configuration files from
+@file{@value{sysconfdir}/tinc/@var{netname}/}.
+Specifying . for @var{netname} is the same as not specifying any @var{netname}.
+@xref{Multiple networks}.
@item -K, --generate-keys[=@var{bits}]
Generate public/private keypair of @var{bits} length. If @var{bits} is not specified,
Partially rereads configuration files.
Connections to hosts whose host config file are removed are closed.
New outgoing connections specified in @file{tinc.conf} will be made.
+If the --logfile option is used, this will also close and reopen the log file,
+useful when log rotation is used.
@item INT
Temporarily increases debug level to 5.
projects / tinc / blobdiff