============== The TINC HOWTO ============== Wessel Dankers wsl@nl.linux.org Introduction ------------ Tinc is a system to create a virtual ethernet network on top of an existing infrastructure. This infrastructure can be anything from modem lines to gigabit ethernet networks, as long as they talk IP. Once you install and configure tinc, your host will get an extra IP address, just like it would when you stick an extra ethernet card into it. Using this IP address, it can communicate with all hosts in its virtual network using strong encryption. If you install Tinc on a router (and pick your numbers correctly) you can have the router forward all packets. This way you can---instead of connecting hosts---connect entire sites together! Now you need only one outgoing network connection for both internet and intranet. Architecture ------------ FIXME Getting Tinc ------------ Before you fetch the latest tarball, you might want to check if there's a package for your Linux distribution. One of the main authors is a Debian Developer, so you can expect the Debian packages to be very up to date. The official website for Tinc can be found at http://tinc.nl.linux.org/. There you can find Debian packages, RPM's and of course... the tarball! Since we run Doohickey Linux Pro 1.0, for which no package exists (or indeed the distribution itself) we shall compile the package ourselves. Building -------- The Tinc source adheres to so many standards it makes you head spin. Even the debug messages have been localized! Amazing. Tinc also comes with a configuration script. If you like to see what is there to configure run ./configure --help | more. If you don't have time for such nonsense: ./configure --sysconfdir=/etc This will see if your system is nice enough to run tinc on, and will create some Makefiles and other stuff which will together build tinc. make make install The first will do the actual build, the second copies all files into place. The kernel ---------- FIXME Picking your numbers -------------------- The first thing we should do is pick network numbers. Tinc has a very peculiar taste for network numbers, which is caused by the way it routes traffic. However, it turns out to be really handy if you want to use your tinc host as a router for a site. The numbers have to be in a range that is not yet in use in your existing, real network! In this example we will use numbers from the 192.168.0/16 range. This is standard CIDR notation for all IP addresses from 192.168.0.0 to 192.168.255.255. The /16 means that the first 16 bits form the network part. It is common practice for Tinc networks to use private (RFC 1918) addresses. This is not necessary, but it would be a waste to use official addresses for a private network! In the example we will connect three machines: f00f, fdiv and hlt. We will give each an address, but not just that, also a slice of our address space to play with. Host Real address Tinc network --------------------------------------------------- f00f 126.202.37.20 192.168.1.1/24 fdiv 126.202.37.81 192.168.2.1/24 hlt 103.22.1.218 192.168.3.1/24 It is very important that none of the Tinc netmasks overlap! Note how the 192.168.0/16 network covers the entire address space of the three hosts. We will refer to the 192.168.0/16 network as the `umbrella' from now on. As you can see we can fit 256 hosts into this umbrella this way, which is also the practical maximum for tinc. The configuration file ---------------------- Let's create a configuration file for f00f. We have to put it in /etc/tinc, unless you participate in multiple umbrella's (more on that later). MyOwnVPNIP = 192.168.1.1/24 VpnMask = 255.255.0.0 ConnectTo = 126.202.37.81 ConnectTo = 103.22.1.218 The first two lines tell Tinc about the numbers we have chosen above. Using the ConnectTo lines, the daemon will seek contact with the rest of the umbrella. It's possible to configure any number of ConnectTo lines, you can even omit them so that it just sits and waits until someone else contacts it. Until someone does, the poor daemon won't be able to send any data because it doesn't know where everybody is. The passphrases --------------- We will have to generate keys for ourselves, and get a key from everybody we want to ConnectTo. -- $Id: HOWTO,v 1.2.2.1 2000/06/30 20:50:47 wsl Exp $