# Sample tinc configuration file

# This is a comment.
# Spaces and tabs are eliminated.
# The = sign isn't strictly necessary any longer, though you may want
# to leave it in as it improves readability :)
# Variable names are treated case insensitive.

# The internet host to connect with
# comment these out to make yourself a listen-only connection
# You may use an IP address or its FQDN.
ConnectTo = 1.2.3.4

# Connect to which port of the `ConnectTo' host

# It is advised that you only connect to ports that are < 1024,
# because some malicious (non-root) user may run a fake tincd on ports
# above 1024.
# The default port is 655, the port that has been assigned to tinc
# by the IANA. If you want tincd to listen on any other port than 655,
# you can use ListenPort for the `server', and ConnectPort for the
# `client'.

# You may use the prefixes 0x or 0 to denote a hexadecimal or octal
# number respectively.
ConnectPort = 0x300

# Listen on which port
ListenPort = 200

# My own VPN IP
# You may use the /nn notation to indicate the number of bits used for
# the mask, /8 is equivalent to the netmask 255.0.0.0 (the first 8
# bits are set to 1).
MyOwnVPNIP = 10.x.x.x/8

# VPN Netmask
# You'll need this option if you use the Debian or Redhat init
# scripts.  Put in here a netmask that covers your entire VPN network;
# it is used to set routes from the init script, tinc itself ignores
# it.
VpnMask = 255.255.0.0

# Which local file?
# Default is /dev/tap0
TapDevice = /dev/tap1