PMTU options go in host config files, and don't work in combination with TCPOnly.

diff --git a/examples/bridging-with-dhcp.mdwn b/examples/bridging-with-dhcp.mdwn
index 14116cfe134875a641fb887b77757ff69b1bf72e..354d80547ce7ebb2bd2591c188ea3829cffa2fe2 100644 (file)
--- a/examples/bridging-with-dhcp.mdwn
+++ b/examples/bridging-with-dhcp.mdwn
@@ -133,8 +133,6 @@
 >     Device = /dev/net/tun
 >     Interface = tun0
 >     Mode = switch
->     PMTU = 1280
->     PMTUDiscovery = yes
 >     Name = client02' | sudo tee /etc/tinc/myvpn01/tinc.conf
 >     
 >     sudo cat /etc/tinc/myvpn01/tinc.conf
@@ -177,6 +175,8 @@
 >     
 >     sudo rm /etc/tinc/myvpn01/rsa_key.priv
 >     sudo rm /etc/tinc/myvpn01/hosts/client02
+>     echo 'PMTU = 1280
+>     PMTUDiscovery = yes' | sudo tee --append /etc/tinc/myvpn01/hosts/client02
 >     sudo tincd -n myvpn01 -K
 >     
 >     ------------------------------------------------------------------------

diff --git a/examples/ipv6-network.mdwn b/examples/ipv6-network.mdwn
index 485f5669e3a61f6a7dc9ae81c094684eb45a0a57..9ea6da4cb7abdc7086e99f8dc697435ae611225d 100644 (file)
--- a/examples/ipv6-network.mdwn
+++ b/examples/ipv6-network.mdwn
@@ -42,8 +42,6 @@ This document is to highlight an example setup for using tinc to create an IPv6
 >      Name = routera
 >      Device=/dev/net/tun
 >      TCPOnly = on
->      PMTU = 1280
->      PMTUDiscovery = yes
 >      Mode = switch
 >      Interface = vpn6
 >     
@@ -74,8 +72,6 @@ This document is to highlight an example setup for using tinc to create an IPv6
 >      Name=routerb
 >      Device=/dev/net/tun
 >      TCPOnly = yes
->      PMTU = 1280
->      PMTUDiscovery = yes
 >      Mode = switch
 >      Interface = vpn6
 >      ConnectTo = routera