Configuration Help

[Guus Sliepen]

On Thu, Nov 06, 2003 at 10:50:16PM +0100, Michael Brandstetter wrote:

> i have set up two tincd as mentioned on this site:
> http://mia.ece.uic.edu/~papers/volans/tincd.html

You should also read tinc's manual:

http://tinc.nl.linux.org/documentation/tinc

> but all i get on the client side is:
> [ root at mondhexe ]: # tail -f /var/log/tinc.log
> 
> Trying to connect to naturstrom (80.132.178.186 port 655)
> Timeout from naturstrom (80.132.178.186 port 655) during authentication
> Closing connection with naturstrom (80.132.178.186 port 655)

> on the server side:
> [ root at sphinx ]: # tail -f /var/log/tinc.log
> 
> /dev/tun is a Linux tun/tap device (tun mode)
> Executing script tinc-up
> Creating metasocket failed: Die Adreßfamilie wird von der Protokollfamilie
> nicht unterstützt
> Listening on 0.0.0.0 port 655
> Ready
> Read packet of 98 bytes from Linux tun/tap device (tun mode)
> Cannot route packet: unknown IPv4 destination address 192.168.33.13
> Writing packet of 126 bytes to Linux tun/tap device (tun mode)
> Read packet of 98 bytes from Linux tun/tap device (tun mode)
> Cannot route packet: unknown IPv4 destination address 192.168.33.13

It tries to connect to naturstrom, but a connection is never made.
Naturstrom never even mentions receiving an incoming connection. Perhaps
there is a firewall blocking port 655? Or perhaps the domain name
naturstrom.mine.nu didn't point to the right IP address at that time?

-- 
Met vriendelijke groet / with kind regards,
    Guus Sliepen <guus at sliepen.eu.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://brouwer.uvt.nl/pipermail/tinc/attachments/20031107/62e7586c/attachment.pgp